Updated Using HPE OneView HPE2-T37 Study Guide - Pass Your HPE2-T37 Exam With Ease

Updated Using HPE OneView HPE2-T37 Study Guide – Pass Your HPE2-T37 Exam With Ease

Eleanor2022-08-30T08:34:53+00:00

By Eleanor HPE, HPE Product Certified - OneView [2022] HPE2-T37, HPE2-T37 exam dumps, HPE2-T37 study guide 0 Comments

To all new and old customers, the Using HPE OneView HPE2-T37 study guide has been updated, which could be your good learning material for passing with ease. With the HPE2-T37 study guide by ITPrepare, you no longer have to worry about failing your HPE2-T37 Using HPE OneView Exam or fear about missing classes due to the hectic lifestyles of today’s generation. The Using HPE OneView HPE2-T37 exam dumps are downloadable as a pdf file to any type of device including, PC, MAC, laptop, tablet, and smartphone at your convenience.

Choose to check the free HPE2-T37 dumps demo online before downloading the HPE2-T37 pdf file:

Page 1 of 4

1. Refer to the exhibit.

Which statement about the logical interconnect shown is true?

For FC uplink sets, an additional uplink from second module should be added for redundancy.

The maximum supported number of the internal networks for logical interconnect is configured.

Additional uplink ports can be added to ETH-Uplink to increase available bandwidth.

FC uplinks are not supported and will be converted to FCoE or RoCE uplinks.

2. Which statement about the volume template is true?

Users will be able to change sharing type and volume capacity

A volume created using this template will not support deduplication

A volume created using this template mil not support snapshots

Users will be able to select storage pool during volume creation

3. DRAG DROP

For HPE Primera, match each task with the management tool that can be used to perform it.

4. Your customer wants to manage their HPE Superdome Flex using HPE OneView.

Which component must be added to HPE OneView to accomplish this task?

Baseboard Management Controller (BMC)

Rack Management Controller (RMC)

all nPARs created within the complex

only the base chassis from the complex

5. Which statement about HPE OneView Global Dashboard is true?

It is an application that can be installed on Windows or Linux system that will provide automated discovery of HPE OneView instances

It is a plugin to HPE Oneview that will allow integration of HPE oneView with VMware management and monitoring components

It is a virtual appliance that can aggregate health and inventory information from multiple HPE OneView appliances or HPE Composers

It is a plugin to vCenter Server that will allow management of the components added to HPE Oneview from vCenter server interface

6. Which statement regarding HPE OneView backup restore is true?

During backup restore, users with Administrator privileges can still login to HPE OneView

An HPE OneView backup can be used to restore individual components like server profile

Users with Backup Administrator privileges can restore an HPE OneView backup

Only users with Infrastructure Administrator privileges can restore an HPE OneView backup

7. Refer to the exhibit.

After adding SAN Manager to HPE OneView. you noticed that all SANs are in the discovered state .

How will this affect HPE OneView storage management capabilities?

Snapshot functionality will be limited only to the volumes not using these SANs.

Volume presentation through server profile will work with the discovered state.

Auto-zoning functionality will not work until SANs are associated with networks.

Volume provisioning will only work for arrays that ate accessible through these SANs.

8. Which statement about managing an HPE BiaoeSystem server is true?

A multi-enclosure Virtual Connect domain can be imported to HPE OneView without disrupting servers

Both c3000 and C7000 HPE BladeSystems enclosures can be imported to HPE OneView for monitoring

An HPE server blade cannot be deleted from HPE OneView It must be physically removed from the enclosure

An HPE server blade can be removed from HPE OneView by deleting the server from the Server Hardware section

9. HOTSPOT

Click the option that will allow you to update the firmware of master and satellite modules.

10. Which connection type can be defined within a server profile for an MPE ProLiant DL server?

iSCSI

RoCE

Ethernet

Page 2 of 4

11. Refer to the exhibit.

Your customer created multiple networks in HPE OneView, but only Eth-1 is available to be used within a server profile .

What is a likely cause of this situation?

The other networks are not configured with the required Smart Link parameter.

The other networks are not added to the Logical Interconnect Group configuration.

The other networks have Private Network' selected, which hides them from ComputeModules.

The other networks are configured with a purpose other than General or Management.

12. How can your customer implement HPE OneView so that it can be used to manage an HPE ProLiant server and HPE BladeSystem?

As an application running on the server with Windows system.

As a physical appliance based on HPE ProLiant 360 Gen 10.

As an application running on the server with CentOS Linux system

As a virtual appliance running on the supported hypervisor.

13. How will setting the Purpose field within the network definition of a server profile impact the network traffic?

network purpose can give higher priority for a specific type of traffic

network purpose will impact the traffic only if Virtual Connect modules are used

network purpose will define QoS within Logical Interconnect

network purpose does not affect the behavior of the network

14. Your customer is considering HPE Synergy as a hardware platform for visualization workload. The customer environment is wry dynamic, and they often have to modify hypervisor networking.

Which resource provided by HPE should you discuss with this customer?

HPE OneView Global Dashboard allows server profile replication and change management.

PowerShell Library for HPE OneView allows scripted environment modification.

HPE OneView for VMware vCenter Server will enable host profile functionality and simplify changes.

HPE Image Streamer provides templates which can be updated to map the hypervisor requirements

15. What is the best practice when deploying an HPE OneView appliance?

Enable VMware Fault Tolerance if the appliance is deployed to a VMware hypervisor.

deploy the appliance in a hypervisor cluster that Is not managed by OneView.

Use thin-provisioning for the HPE OneView appliance to save storage capacity.

Deploy two HPE OneView appliances and configure them in HA mode.

16. What step must be taken to add an HPE SuperDome Flex to an existing OneView environment

A Rack Management Controller must be added to HPE OneView.

HPE Superdome Flex can be added to HPE OneView after at least one nPAR is created.

Each HPE Superdome Flex chassis must be added Individually using BMC I

HPE Superdome Flex complex can be added by adding base chassis of this complex.

17. You plan to update HPE OneVew to the latest version

What Should you do Mora starting HPE OneView update?

Disable HPE Remote Support at toe HPE OneView appliance level

Put all servers managed through HPE OneView to maintenance state

Run the Update Readiness checker tool to evaluate HPE OneView health status

Create a support dump for the appliance and for all managed logical interconnects

18. HOTSPOT

You want a server profile to be automatically applied when an HPE Synergy Compute Module is replaced.

Click the appropriate configuration option.

19. Your customer plans to use HPE OneView to manage a small environment based on HPE ProLiant servers that includes G7 and Gen 10 systems .

What should you explain to thiscustomer?

HPE Management Agent must he installed for HPE ProLiant Gen 10 servers.

HPE ProLiant G7 and Gen10 cannot be managed using the same appliance.

Not all of the features will be available for HPE ProLiant G7 systems.

HPE ProLiant Gen 10 servers do not need an HPE OneView license.

20. Which components require an HPE OneView license for management?

HPE Virtual Connect modules

HPE Apollo XL 170r

Brocade and Cisco SAN Manager

HPE Primera and HPE 3PAR

Page 3 of 4

21. Which statement about an HPE OneView server profile is true?

A server profile can be created only for HPE BladeSystem, HPE Synergy, and HPE Superdome Flex servers.

A server profile created for a specific server hardware type cannot be moved to a server with a different server hardware type.

A server profile can be used to configure a local storage controller, but cannot be used to configure SAN-based storage.

A server profile can be used to update firmware and drivers when the operating system on the server is up and running.

22. Which action is allowed on storage pools managed by HPE OneView?

Volume provisioning

Setting storage pool replication

Changing storage pool RAID level

Changing storage pool capacity

23. Which statement about access to HPE Onboard Administrator is true when an HPE BladeSystem enclosure is added to HPE OneView?

It is blocked when an HPE BladeSystem enclosure is managed using HPE OneView.

It is enabled only when an HPE BladeSystem enclosure is monitored using HPE OneView.

It is enabled when an HPE BladeSystem is either managed or monitored using HPE OneView.

It is blocked when HPE BladeSystem enclosure is monitored using HPE OneView.

24. You want to update the firmware for only two HPE Synergy Virtual Connect SE 32Gb FC Modules of a large environment.

From which level must this procedure be initiated?

Logical Enclosure

Logical Interconnect Group

Logical Interconnect

Server Profile

25. Which statement about a Logical Enclosure for HPE BladeSystem is Hue?

A logical enclosure can have between 1 to 5 HPE BladeSystem c7000 enclosures.

A logical enclosure must be created only for monitored HPE BladeSystem C700O enclosures.

A logical enclosure is created automatically, and it is always based on a single enclosure.

A logical enclosure can contain a mix of HPE BladeSystem c7000 and C3000 enclosures.

26. What event occurs on iLO when an HPE ProLiant server is added to HPE OneView?

IPMI credentials are configured for the iLO

REST API plugin is enabled for iLO

Active Directory configuration is performed on iLO

SSO certificate is added to the iLO

27. what is required to add a remote frame to the primary management ring?

UUD of the remote HPE Composer

Serial number of one of the remote frames

Remote frame Link Module IPv6 address

Request code from the primary HPE Composer

28. Which licenses are optional to be purchased separately for HPE Synergy?

Global Dashboard licenses

FC Upgrade licenses

HPE OneView licenses

Virtual Connect licenses

29. Your customer asks you if it is possible to perform HPE Synergy initial setup remotely .

How should you respond?

Remote HPE Synergy setup is possible if HPE Composer 2 is used and a DHCP server Is available in the management network.

Remote HPE Synergy Installation can be done only if an additional set of the services was purchased together with hardware platform.

HPE Synergy cannot be deployed remotely, as Initial setup must be performed using a local console connection.

HPE Synergy can be configured remotely through a secure connection to the FLM if this option was enabled In the factory.

30. Refer to the exhibit.

A customer complains that firmware compliance is empty. The customer confirmed that Synergy Service Pack is uploaded to the HPE OneView repository .

How should you respond?

The refresh procedure must be performed on each logical enclosure to refresh firmware.

All of the components are up to date and compliant with firmware baseline.

The firmware repository service must be restarted using maintenance connection.

The firmware repository is not defined within firmware compliance report.

Page 4 of 4

31. You are creating a Logical Interconnect Group for a three-frame HPE Synergy solution with HPE Virtual Connect SE100Gb F32 Modules for Synergy.

In which scenario should you set redundancy for master modules to be highly available?

When storm control or loop protection will be enabled for Virtual Connect modules

When each of the frames has two Virtual Connect modules installed

When each Virtual Connect module is installed in different frame

When each Virtual Connect module is installed in different fabric

32. DRAG DROP

For each feature. indicate whether it is available with both hpe oneview Standard and hpe oneview Advanced licenses, or only with an hpe oneview Advanced license.

33. You originally configured boot mode for HPE ProLiant Gen10 server to ‘Legacy BIOS’ in an HPE OneView server profile and deployed an operating system. A few weeks later, you change the boot mode to the ‘UEFI optimized’ to leverage some features provided by this mode.

What must you do next?

reset an il_0 management processor to activate the new boot mode for the server

reinstall an operating system, as UEFI is using different drive format than Legacy BIOS

reset BIOS settings to the defaults so UEFI settings can be applied

reset BIOS settings to the defaults through the server profile after changing the boot mode

34. HOTSPOT

As a part of troubleshooting, you have to reinstall the same version of the firmware on an HPE Synergy Compute Module. Click the area within the Firmware section of the server profile that will allow you to install the same firmware version.

35. Your customer wants to optimize GenlO servers for a virtualization workload by configuring all of them with a specific workload profile in the BIOS. All of the servers are managed using HPE OneView.

How can this task be completed?

Set a specific workload profile within Logical Interconnect Group and update all servers.

Set a specific workload profile for all managed servers as an HPE OneView global setting.

Set a specific workload profile within server profile template and update all profiles.

Set a specific workload profile using IL0 interface for each individual server.

36. A customer has to deploy 21 HPE Synergy Compute Modules in a boot from SAN setup .

How this task can be simplified while keeping the profile consistent?

Boot volumes can be created on demand and defined in the server profile template.

Boot volumes can be prepared in advance and later presented as shared volumes to the Compute Modules.

An existing volume can be replicated automatically when creating a server profile.

single SAN volume can be created and utilized by all HPE Synergy Compute Modules.

37. 1.What is a network set?

It is a collection of all internal networks defined for a specific type of traffic like vSAN or vMotion.

It is a collection of untagged Ethernet networks that form a named group to simplify server profile creation.

It is a collection of tagged Ethernet networks that form a named group to simplify server profile creation.

It is a collection of all networks configured within HPE OneView regardless of network type.

38. HOTSPOT

Click the option that will allow you to disable virtual MAC addresses or generate a new pool of virtual Worldwide Names.

39. HOTSPOT

Click the option that will prevent the appliance from sending any email notifications or forwarding any SNMP traps that are related to the server hardware.

40. Your customer added HPE Primera to HPE OneVlew and enabled volume provisioning on all storage pools. For security reasons, the customer wants to disable volume provisioning using HPE OneView on a specific storage pool.

How can this task be completed?

The storage pool should be removed from HPE OneView using a PowerShell script.

The storage pool should be disabled using the array management tool.

The storage pool state should be changed to discovered using HPE OneView.

The storage pool should be marked as read-only using HPE OneView.

Updated Using HPE OneView HPE2-T37 Study Guide – Pass Your HPE2-T37 Exam With Ease