Choose The Updated SK0-005 Study Guide From ITPrepare To Study SK0-005 Dumps Questions

Eleanor2022-10-21T03:29:27+00:00

While answering the true SK0-005 CompTIA Server+ Certification Exam, IT students and professionals are required to complete 90 questions, the passing score should be 750 (on a scale of 100-900). ITPrepare has updated the CompTIA Server+ SK0-005 study guide with 160 practice exam questions and answers, with ITPrepare, you can study all those SK0-005 dumps questions well with the pdf file. Below is the SK0-005 free dumps demo we share online, which help you check the quality of ITPrepare’s SK0-005 study guide.

Page 1 of 6

1. Which of the following documents would be useful when trying to restore IT infrastructure operations after a non-planned interruption?

Service-level agreement

Disaster recovery plan

Business impact analysis

Business continuity plan

2. A server room with many racks of servers is managed remotely with occasional on-site support .

Which of the following would be the MOST cost-effective option to administer and troubleshoot network problems locally on the servers?

Management port

Crash cart

IP KVM

KVM

3. A global organization keeps personnel application servers that are local to each country. However, a security audit shows these application servers are accessible from sites in other countries .

Which of the following hardening techniques should the organization use to restrict access to only sites that are in the same country?

Configure a firewall

Close the unneeded ports

Install a HIDS

Disable unneeded services.

4. Modify the appropriate route entries to resolve the Internet connectivity issue.

If at any time you would like to bring back the initial state of the simulation, please click the Reset All button.

5. A technician needs to deploy an operating system that would optimize server resources .

Which of the following server installation methods would BEST meet this requirement?

Full

Bare metal

Core

GUI

6. A server administrator has been creating new VMs one by one. The administrator notices the system requirements are very similar, even with different applications .

Which of the following would help the administrator accomplish this task in the SHORTEST amount of time and meet the system requirements?

Snapshot

Deduplication

System Restore

Template

7. A server administrator is experiencing difficulty configuring MySQL on a Linux server.

The administrator issues the getenforce command and receives the following output:

># Enforcing

Which of the following commands should the administrator issue to configure MySQL successfully?

setenforce 0

setenforce permissive

setenforce 1

setenforce disabled

8. A user cannot save large files to a directory on a Linux server that was accepting smaller files a few minutes ago .

Which of the following commands should a technician use to identify the issue?

pvdisplay

mount

df -h

fdisk -l

9. 1.A datacenter in a remote location lost power. The power has since been restored, but one ol the servers has not come back online. After some investigation, the server is found to still be powered off .

Which of the following is the BEST method to power on the server remotely?

Crash cart

Out-of-band console

IP KVM

RDP

10. A server is reporting a hard drive S.M.A.R.T. error. When a technician checks on the drive, however, it appears that all drives in the server are functioning normally .

Which of the following is the reason for this issue?

error is a predictive failure notice. The drive will fail in the near future and should be replaced at the next earliest time possible

error is a write operation error. It has detected that the write sent to the drive was incorrectly formatted and has requested a retransmission of the write from the controller

error is simply a bad sector. The drive has marked the sector as bad and will continue to function properly

error is an ECC error. Due to error checking and correcting, the drive has corrected the missing bit and completed the write operation correctly.

Page 2 of 6

11. Which of the following, if properly configured, would prevent a user from installing an OS on a server? (Select TWO).

Administrator password

Group Policy Object

Root password

SELInux

Bootloader password

BIOS/UEFI password

12. A server administrator has configured a web server .

Which of the following does the administrator need to install to make the website trusted?

PKI

SSL

LDAP

DNS

13. A technician is laying out a filesystem on a new Linux server .

Which of the following tools would work BEST to allow the technician to increase a partition's size in the future without reformatting it?

LVM

DiskPart

fdisk

Format

14. A server administrator receives a report that Ann, a new user, is unable to save a file to her home directory on a server.

The administrator checks Ann’s home directory permissions and discovers the following:

dr-xr-xr-- /home/Ann

Which of the following commands should the administrator use to resolve the issue without granting unnecessary permissions?

chmod777/home/Ann

chmod666/home/Ann

chmod711/home/Ann

chmod754/home/Ann

15. Which of the following policies would be BEST to deter a brute-force login attack?

Password complexity

Password reuse

Account age threshold

Account lockout threshold

16. A server administrator was asked to build a storage array with the highest possible capacity .

Which of the following RAID levels should the administrator choose?

RAID 0

RAID 1

RAID 5

RAID 6

17. Users in an office lost access to a file server following a short power outage. The server administrator noticed the server was powered off .

Which of the following should the administrator do to prevent this situation in the future?

Connect the server to a KVM

Use cable management

Connect the server to a redundant network

Connect the server to a UPS

18. A server administrator is testing a disaster recovery plan. The test involves creating a downtime scenario and taking the necessary steps .

Which of the following testing methods is the administrator MOST likely performing?

Backup recovery

Simulated

Tabletop

Live failover

19. Which of the following access control methodologies can be described BEST as allowing a user the least access based on the jobs the user needs to perform?

Scope-based

Role-based

Location-based

Rule-based

20. An administrator needs to disable root login over SSH .

Which of the following tiles should be edited to complete this task?

/root.ssh/sshd/config

/etc.ssh/sshd_config

/root/.ssh/ssh_config

/etc.sshs_shd_config

Page 3 of 6

21. A technician has received multiple reports of issues with a server. The server occasionally has a BSOD, powers off unexpectedly, and has fans that run continuously .

Which of the following BEST represents what the technician should investigate during troubleshooting?

Firmware incompatibility

CPU overheating

LED indicators

ESD issues

22. Following a recent power outage, a server in the datacenter has been constantly going offline and losing its configuration. Users have been experiencing access issues while using the application on the server. The server technician notices the data and time are incorrect when the server is online. All other servers are working .

Which of the following would MOST likely cause this issue? (Choose two.)

The server has a faulty power supply

The server has a CMOS battery failure

The server requires OS updates

The server has a malfunctioning LED panel

The servers do not have NTP configured

The time synchronization service is disabled on the servers

23. A technician is connecting a server’s secondary NIC to a separate network. The technician connects the cable to the switch but then does not see any link lights on the NIC. The technician confirms there is nothing wrong on the network or with the physical connection .

Which of the following should the technician perform NEXT?

Restart the server

Configure the network on the server

Enable the port on the server

Check the DHCP configuration

24. A technician is configuring a server that requires secure remote access .

Which of the following ports should the technician use?

443

25. When configuring networking on a VM, which of the following methods would allow multiple VMs to share the same host IP address?

Bridged

NAT

Host only

vSwitch

26. An administrator is configuring a server that will host a high-performance financial application .

Which of the following disk types will serve this purpose?

SAS SSD

SATA SSD

SAS drive with 10000rpm

SATA drive with 15000rpm

27. A user reports that a server is not accessible. A technician sees the following message on the server: PXE server not found .

Which of the following should the technician attempt FIRST to resolve the issue?

Ensure the network cable is properly connected and reboot the server.

Eject the disk in the CD-ROM and reboot the server.

Enter the BIOS and correct the boot sequence on the server.

Power down the server and reseat the PCI cards.

28. An administrator is investigating a physical server mat will not Boot into the OS. The server has three hard drives configured in a RAID 5 array. The server passes POST, out the OS does not load. The administrator verities the CPU and RAM are Doth seated correctly and checks the dual power supplies. The administrator then verifies all the BIOS settings are correct and connects a bootable USB drive in the server, and the OS loads correctly .

Which of the following is causing the issue?

The page file is too small.

The CPU has failed.

There are multiple failed hard drives.

There are mismatched RAM modules.

RAID 5 requires four drives

29. A technician wants to limit disk usage on a server .

Which of the following should the technician implement?

Formatting

Compression

Disk quotas

Partitioning

30. A technician is trying to determine the reason why a Linux server is not communicating on a network.

The returned network configuration is as follows:

eth0: flags=4163<UP, BROADCAST,RUNNING,MULTICAST> mtu 1500

inet 127.0.0.1 network 255.255.0.0 broadcast 127.0.0.1

Which of the following BEST describes what is happening?

The server is configured to use DHCP on a network that has multiple scope options

The server is configured to use DHCP, but the DHCP server is sending an incorrect subnet mask

The server is configured to use DHCP on a network that does not have a DHCP server

The server is configured to use DHCP, but the DHCP server is sending an incorrect MTU setting

Page 4 of 6

31. A technician is deploying a single server to monitor and record me security cameras at a remote site, which of the following architecture types should be used to minimize cost?

Virtual

Blade

Tower

Rack mount

32. A backup application is copying only changed files each line it runs. During a restore, however, only a single file is used .

Which of the following backup methods does this describe?

Open file

Synthetic full

Full Incremental

Full differential

33. A server administrator needs to keep a copy of an important fileshare that can be used to restore the share as quickly as possible .

Which of the following is the BEST solution?

Copy the fileshare to an LTO-4 tape drive

Configure a new incremental backup job for the fileshare

Create an additional partition and move a copy of the fileshare

Create a snapshot of the fileshare

34. Which of the following tools will analyze network logs in real time to report on suspicious log events?

Syslog

DLP

SIEM

HIPS

35. A snapshot is a feature that can be used in hypervisors to:

roll back firmware updates.

restore to a previous version.

roll back application drivers.

perform a backup restore.

36. A server administrator wants to run a performance monitor for optimal system utilization .

Which of the following metrics can the administrator use for monitoring? (Choose two.)

Memory

Page file

Services

Application

CPU

Heartbeat

37. A company has implemented a requirement to encrypt all the hard drives on its servers as part of a data loss prevention strategy .

Which of the following should the company also perform as a data loss prevention method?

Encrypt all network traffic

Implement MFA on all the servers with encrypted data

Block the servers from using an encrypted USB

Implement port security on the switches

38. CORRECT TEXT

A technician is attempting to reboot a remote physical Linux server. However, attempts to command a shutdown -----now result in the loss of the SSH connection. The server still responds to pings .

Which of the following should the technician use to command a remote shutdown?

A virtual serial console

B. A KVM

C. An IDRAC

D. A crash cart

39. A server technician is configuring the IP address on a newly installed server. The documented configuration specifies using an IP address of 10.20.10.15 and a default gateway of 10.20.10.254 .

Which of the following subnet masks would be appropriate for this setup?

255.255.255.0

255.255.255.128

255.255.255.240

255.255.255.254

40. A company wants to deploy software to all users, Out very few of men will be using the software at any one point in time .

Which of the following licensing models would be BEST lot the company?

Per site

Per concurrent user

Per core

Per instance

Page 5 of 6

41. The Chief Information Officer (CIO) of a datacenter is concerned that transmissions from the building can be detected from the outside .

Which of the following would resolve this concern? (Choose two.)

RFID

Proximity readers

Signal blocking

Camouflage

Reflective glass

Bollards

42. Ann, an administrator, is configuring a two-node cluster that will be deployed. To check the cluster’s functionality, she shuts down the active node. Cluster behavior is as expected, and the passive node is now active. Ann powers on the server again and wants to return to the original configuration .

Which of the following cluster features will allow Ann to complete this task?

Heartbeat

Failback

Redundancy

Load balancing

43. Which of the following are measures that should be taken when a data breach occurs? (Select TWO).

Restore the data from backup.

Disclose the incident.

Disable unnecessary ports.

Run an antivirus scan.

Identify the exploited vulnerability.

Move the data to a different location.

44. A server administrator needs to create a new folder on a file server that only specific users can access .

Which of the following BEST describes how the server administrator can accomplish this task?

Create a group that includes all users and assign it to an AC

Assign individual permissions on the folder to each user. C Create a group that includes all users and assign the proper permissions.

Assign ownership on the folder for each user.

45. A server administrator has noticed that the storage utilization on a file server is growing faster than planned. The administrator wants to ensure that, in the future, there is a more direct relationship between the number of users using the server and the amount of space that might be used .

Which of the following would BEST enable this correlation?

Partitioning

Deduplication

Disk quotas

Compression

46. Which of me following should be placed at the top of a Bash script to ensure it can be executed?

bash

!execute

@eacho off

47. A company stores extremely sensitive data on an alt-gapped system .

Which of the following can Be Implemented to increase security against a potential insider threat?

Two-person Integrity

SSO

SIEM

Faraday cage

MFA

48. A systems administrator is setting up a server on a LAN that uses an address space that follows the RFC 1918 standard .

Which of the following IP addresses should the administrator use to be in compliance with the standard?

11.251.196.241

171.245.198.241

172.16.19.241

193.168.145.241

49. Users at a company work with highly sensitive data. The security department implemented an administrative and technical control to enforce least-privilege access assigned to files. However, the security department has discovered unauthorized data exfiltration .

Which of the following is the BEST way to protect the data from leaking?

Utilize privacy screens.

Implement disk quotas.

Install a DLP solution.

Enforce the lock-screen feature.

50. A server technician installs a new NIC on a server and configures the NIC for IP connectivity. The technician then tests the connection using the ping command.

Given the following partial output of the ping and ipconfig commands:

Which of the following caused the issue?

Duplicate IP address

Incorrect default gateway

DHCP misconfiguration

Incorrect routing table

Page 6 of 6

51. Which of the following steps in the troubleshooting theory should be performed after a solution has been implemented? (Choose two.)

Perform a root cause analysis

Develop a plan of action

Document the findings

Escalate the issue

Scope the issue

Notify the users

52. A server administrator is deploying a new server that has two hard drives on which to install the OS .

Which of the following RAID configurations should be used to provide redundancy for the OS?

RAID 0

RAID 1

RAID 5

RAID 6

53. A technician needs to install a Type 1 hypervisor on a server. The server has SD card slots, a SAS controller, and a SATA controller, and it is attached to a NAS.

On which of the following drive types should the technician install the hypervisor?

SD card

NAS drive

SATA drive

SAS drive

54. A systems administrator is setting up a new server that will be used as a DHCP server. The administrator installs the OS but is then unable to log on using Active Directory credentials. The administrator logs on using the local administrator account and verifies the server has the correct IP address, subnet mask, and default gateway. The administrator then gets on another server and can ping the new server .

Which of the following is causing the issue?

Port 443 is not open on the firewall

The server is experiencing a downstream failure

The local hosts file is blank

The server is not joined to the domain

55. Which of the following BEST measures now much downtime an organization can tolerate Curing an unplanned outage?

SLA

BIA

RTO

MTTR

56. Which of the following would a systems administrator implement to ensure all web traffic is secure?

SSH

SSL

SMTP

PGP

57. After configuring IP networking on a newly commissioned server, a server administrator installs a straight- through network cable from the patch panel to the switch. The administrator then returns to the server to test network connectivity using the ping command.

The partial output of the ping and ipconfig commands are displayed below:

The administrator returns to the switch and notices an amber link light on the port where the server is connected .

Which of the following is the MOST likely reason for the lack of network connectivity?

Network port security

An improper VLAN configuration

A misconfigured DHCP server

A misconfigured NIC on the server

58. A server technician has been asked to upload a few files from the internal web server to the internal FTP server. The technician logs in to the web server using PuTTY, but the connection to the FTP server fails. However, the FTP connection from the technician’s workstation is sucessful.

To troubleshoot the issue, the technician executes the following command on both the web server and the workstation:

ping ftp.acme.local

The IP address in the command output is different on each machine .

Which of the following is the MOST likely reason for the connection failure?

A misconfigured firewall

A misconfigured hosts.deny file

A misconfigured hosts file

A misconfigured hosts.allow file

59. A systems administrator is preparing to install two servers in a single rack. The administrator is concerned that having both servers in one rack will increase the chance of power issues due to the increased load .

Which of the following should the administrator implement FIRST to address the issue?

Separate circuits

An uninterruptible power supply

Increased PDU capacity

Redundant power supplies

60. A server administrator is exporting Windows system files before patching and saving them to the following location:

\server1ITDept

Which of the following is a storage protocol that the administrator is MOST likely using to save this data?

eSATA

FCoE

CIFS

SAS

Choose The Updated SK0-005 Study Guide From ITPrepare To Study SK0-005 Dumps Questions