Updated Palo Alto Networks PCNSE Exam Dumps With Correct Questions and Answers

Eleanor2022-08-27T03:34:22+00:00

You wish to pass the Palo Alto Networks Certified Network Security Engineer Exam (PCNSE) with good marks, so you can choose the updated Palo Alto Networks PCNSE exam dumps from ITPrepare for good learning. You can download the Palo Alto Networks PCNSE exam dumps pdf file and learn about the key features of Palo Alto Networks Certified Network Security Engineer PCNSE questions. Make your purchasing decision if you believe that updated Palo Alto Networks PCNSE exam dumps will be useful to you using the free Palo Alto Networks Certified Network Security Engineer PCNSE exam demo below.

Page 1 of 4

1. An administrator is using Panorama to manage me and suspects an IKE Crypto mismatch between peers, from the firewalls to Panorama. However, pre-existing logs from the firewalls are not appearing in Panorama.

Which action should be taken to enable the firewalls to send their pre-existing logs to Panorama?

Export the log database.

Use the import option to pull logs.

Use the ACC to consolidate the logs.

Use the scp logdb export command.

2. What type of address object would be useful for internal devices where the addressing structure assigns meaning to certain bits in the address, as illustrated in the diagram?

IP Netmask

IP Wildcard Mask

IP Address

IP Range

3. A company wants to install a PA-3060 firewall between two core switches on a VLAN trunk link. They need to assign each VLAN to its own zone and to assign untagged (native) traffic to its own zone which options differentiates multiple VLAN into separate zones?

Create V-Wire objects with two V-Wire interfaces and define a range of "0-4096 in the "Tag Allowed" field of the V-Wire object.

Create V-Wire objects with two V-Wire subinterfaces and assign only a single VLAN ID to the Tag Allowed" field of the V-Wire object. Repeat for every additional VLAN and use a VLAN ID of 0 for untagged traffic. Assign each interface/sub interface to a unique zone.

Create Layer 3 subinterfaces that are each assigned to a single VLAN ID and a common virtual router. The physical Layer 3 interface would handle untagged traffic. Assign each interface/subinterface t

unique zone. Do not assign any interface an IP address.

Create VLAN objects for each VLAN and assign VLAN interfaces matching each VLAN I

Repeat for every additional VLAN and use a VLAN ID of 0 for untagged traffic. Assign each interface/sub interface to a unique zone.

4. What happens when an A/P firewall cluster synchronies IPsec tunnel security associations (SAs)?

Phase 2 SAs are synchronized over HA2 links

Phase 1 and Phase 2 SAs are synchronized over HA2 links

Phase 1 SAs are synchronized over HA1 links

Phase 1 and Phase 2 SAs are synchronized over HA3 links

5. Refer to the image.

An administrator is tasked with correcting an NTP service configuration for firewalls that cannot use the Global template NTP servers. The administrator needs to change the IP address to a preferable server for this template stack but cannot impact other template stacks.

How can the issue be corrected?

Override the value on the NYCFW template.

Override a template value using a template stack variable.

Override the value on the Global template.

Enable "objects defined in ancestors will take higher precedence" under Panorama settings.

6. What is the function of a service route?

The service route is the method required to use the firewall's management plane to provide services to applications

The service packets enter the firewall on the port assigned from the external service. The server sends its response to the configured destination interface and destination IP address

The service packets exit the firewall on the port assigned for the external service. The server sends its response to the configured source interface and source IP address

Service routes provide access to external services such as DNS servers external authentication servers or Palo Alto Networks services like the Customer Support Portal

7. An administrator device-group commit push is tailing due to a new URL category

How should the administrator correct this issue?

verify that the URL seed Tile has been downloaded and activated on the firewall

change the new category action to alert" and push the configuration again

update the Firewall Apps and Threat version to match the version of Panorama

ensure that the firewall can communicate with the URL cloud

8. WildFire will submit for analysis blocked files that match which profile settings?

files matching Anti-Spyware signatures

files that are blocked by URL filtering

files that are blocked by a File Blocking profile

files matching Anti-Virus signatures

9. An administrator needs to assign a specific DNS server to one firewall within a device group.

Where would the administrator go to edit a template variable at the device level?

Variable CSV export under Panorama > templates

PDF Export under Panorama > templates

Manage variables under Panorama > templates

Managed Devices > Device Association

10. Which statement regarding HA timer settings is true?

Use the Recommended profile for typical failover timer settings

Use the Moderate profile for typical failover timer settings

Use the Aggressive profile for slower failover timer settings.

Use the Critical profile for faster failover timer settings.

Page 2 of 4

11. An organization wishes to roll out decryption but gets some resistance from engineering leadership regarding the guest network.

What is a common obstacle for decrypting traffic from guest devices?

Guest devices may not trust the CA certificate used for the forward untrust certificate.

Guests may use operating systems that can't be decrypted.

The organization has no legal authority to decrypt their traffic.

Guest devices may not trust the CA certificate used for the forward trust certificate.

12. A firewall is configured with SSL Forward Proxy decryption and has the following four enterprise certificate authorities (Cas)

i. Enterprise-Trusted-CA; which is verified as Forward Trust Certificate (The CA is also installed in the trusted store of the end-user browser and system)

ii. Enterprise-Untrusted-CA, which is verified as Forward Untrust Certificate

iii. Enterprise-lntermediate-CA

iv. Enterprise-Root-CA which is verified only as Trusted Root CA

An end-user visits https //www example-website com/ with a server certificate Common Name (CN) www example-website com. The firewall does the SSL Forward Proxy decryption for the website and the server certificate is not trusted by the firewall

The end-user's browser will show that the certificate for www.example-website.com was issued by which of the following?

Enterprise-Untrusted-CA which is a self-signed CA

Enterprise-Trusted-CA which is a self-signed CA

Enterprise-lntermediate-CA which was. in turn, issued by Enterprise-Root-CA

Enterprise-Root-CA which is a self-signed CA

13. An engineer needs to redistribute User-ID mappings from multiple data centers.

Which data flow best describes redistribution of user mappings?

Domain Controller to User-ID agent

User-ID agent to Panorama

User-ID agent to firewall

firewall to firewall

14. An engineer wants to implement the Palo Alto Networks firewall in VWire mode on the internet gateway and wants to be sure of the functions that are supported on the vwire interface

What are three supported functions on the VWire interface? (Choose three)

NAT

QoS

IPSec

OSPF

SSL Decryption

15. An administrator is attempting to create policies tor deployment of a device group and template stack. When creating the policies, the zone drop down list does not include the required zone.

What must the administrator do to correct this issue?

Specify the target device as the master device in the device group

Enable "Share Unused Address and Service Objects with Devices" in Panorama settings

Add the template as a reference template in the device group

Add a firewall to both the device group and the template

16. A firewall has been assigned to a new template stack that contains both "Global" and "Local" templates in Panorama, and a successful commit and push has been performed. While validating the configuration on the local firewall, the engineer discovers that some settings are not being applied as intended.

The setting values from the "Global" template are applied to the firewall instead of the "Local" template that has different values for the same settings.

What should be done to ensure that the settings in the "Local" template are applied while maintaining settings from both templates?

Move the "Global" template above the "Local" template in the template stack.

Perform a commit and push with the "Force Template Values" option selected.

Move the "Local" template above the "Global" template in the template stack.

Override the values on the local firewall and apply the correct settings for each value.

17. A network administrator wants to use a certificate for the SSL/TLS Service Profile.

Which type of certificate should the administrator use?

certificate authority (CA) certificate

client certificate

machine certificate

server certificate

18. An administrator needs to evaluate a recent policy change that was committed and pushed to a firewall device group.

How should the administrator identify the configuration changes?

review the configuration logs on the Monitor tab

click Preview Changes under Push Scope

use Test Policy Match to review the policies in Panorama

context-switch to the affected firewall and use the configuration audit tool

19. Which GlobalProtect component must be configured to enable Clientless VPN?

GlobalProtect satellite

GlobalProtect app

GlobalProtect portal

GlobalProtect gateway

20. During the process of developing a decryption strategy and evaluating which websites are required for corporate users to access, several sites have been identified that cannot be decrypted due to technical reasons. In this case, the technical reason is unsupported ciphers. Traffic to these sites will therefore be blocked if decrypted

How should the engineer proceed?

Allow the firewall to block the sites to improve the security posture

Add the sites to the SSL Decryption Exclusion list to exempt them from decryption

Install the unsupported cipher into the firewall to allow the sites to be decrypted

Create a Security policy to allow access to those sites

Page 3 of 4

21. Which data flow describes redistribution of user mappings?

User-ID agent to firewall

firewall to firewall

Domain Controller to User-ID agent

User-ID agent to Panorama

22. DRAG DROP

Place the steps in the WildFire process workflow in their correct order.

23. What is the best description of the HA4 Keep-Alive Threshold (ms)?

the maximum interval between hello packets that are sent to verify that the HA functionality on the other firewall is operational.

The time that a passive or active-secondary firewall will wait before taking over as the active or active-primary firewall

the timeframe within which the firewall must receive keepalives from a cluster member to know that the cluster member is functional.

The timeframe that the local firewall wait before going to Active state when another cluster member is preventing the cluster from fully synchronizing.

24. You need to allow users to access the office-suite applications of their choice.

How should you configure the firewall to allow access to any office-suite application?

Create an Application Group and add Office 365, Evernote Google Docs and Libre Office

Create an Application Group and add business-systems to it.

Create an Application Filter and name it Office Programs, then filter it on the office programs subcategory.

Create an Application Filter and name it Office Programs then filter on the business-systems category.

25. What are two common reasons to use a "No Decrypt" action to exclude traffic from SSL decryption? (Choose two.)

the website matches a category that is not allowed for most users

the website matches a high-risk category

the web server requires mutual authentication

the website matches a sensitive category

26. Where is information about packet buffer protection logged?

Alert entries are in the Alarms log. Entries for dropped traffic, discarded sessions, and blocked IP address are in the Threat log

All entries are in the System log

Alert entries are in the System log. Entries for dropped traffic, discarded sessions and blocked IP addresses are in the Threat log

All entries are in the Alarms log

27. When you navigate to Network: > GlobalProtect > Portals > Method section, which three options are available? (Choose three)

user-logon (always on)

pre-logon then on-demand

on-demand (manual user initiated connection)

post-logon (always on)

certificate-logon

28. A firewall administrator is trying to identify active routes learned via BGP in the virtual router runtime stats within the GUI. Where can they find this information?

routes listed in the routing table with flags

routes listed in the routing table with flags A?

under the BGP Summary tab

routes listed in the forwarding table with BGP in the Protocol column

29. What are two best practices for incorporating new and modified App-IDs? (Choose two.)

Run the latest PAN-OS version in a supported release tree to have the best performance for the new App-IDs

Configure a security policy rule to allow new App-IDs that might have network-wide impact

Perform a Best Practice Assessment to evaluate the impact of the new or modified App-IDs

Study the release notes and install new App-IDs if they are determined to have low impact

30. When an in-band data port is set up to provide access to required services, what is required for an interface that is assigned to service routes?

The interface must be used for traffic to the required services

You must enable DoS and zone protection

You must set the interface to Layer 2 Layer 3. or virtual wire

You must use a static IP address

Page 4 of 4

31. 1.What can you use with Global Protect to assign user-specific client certificates to each GlobalProtect user?

SSL/TLS Service profile

Certificate profile

SCEP

OCSP Responder

32. the firewall's device group as post-rules

How will the rule order populate once pushed to the firewall?

shared device group policies, firewall device group policies. local policies.

firewall device group policies, local policies. shared device group policies

shared device group policies. local policies, firewall device group policies

local policies, firewall device group policies, shared device group policies

33. Which configuration task is best for reducing load on the management plane?

Disable logging on the default deny rule

Enable session logging at start

Disable pre-defined reports

Set the URL filtering action to send alerts

34. An administrator is building Security rules within a device group to block traffic to and from malicious locations

How should those rules be configured to ensure that they are evaluated with a high priority?

Create the appropriate rules with a Block action and apply them at the top of the Default Rules

Create the appropriate rules with a Block action and apply them at the top of the Security Post-Rules.

Create the appropriate rules with a Block action and apply them at the top of the local firewall Security rules.

Create the appropriate rules with a Block action and apply them at the top of the Security Pre-Rules

35. A user at an internal system queries the DNS server for their web server with a private IP of 10 250 241 131 in the.

The DNS server returns an address of the web server's public address, 200.1.1.10.

In order to reach the web server, which security rule and U-Turn NAT rule must be configured on the firewall?

NAT Rule. Source Zone: Untrust_L3 Source IP: Any Destination Zone: Untrust_L3 Destination IP: 200.1.1.10 Destination Translation address: 10.250.241.131 Security Rule: Source Zone: Untrust_3 Source IP: Any Destination Zone: DMZ Destination IP: 10.250.241.131

NAT Rule: Source Zone: Untrust_L3 Source IP: Any Destination Zone: DMZ Destination IP: 200.1.1.10 Destination Translation address: 10.250.241.131 Security Rule: Source Zone: Trust-L3 Source IP: Any Destination Zone: DMZ Destination IP: 10.250.241.131

NAT Rule: Source Zone: Trust L3 Source IP: Any Destination Zone: Untrust_L3 Destination IP: 200.1.1.10 Destination Translation address: 10.250.241.131 Security Rule: Source Zone: Trust-L3 Source IP: Any Destination Zone: DMZ Destination IP: 200.1.1.10

NAT Rule: Source Zone: Untrust_L3 Source IP: Any Destination Zone: Untrust_L3 Destination IP: 200.1.1.10 Destination Translation address: 10.250.241.131 Security Rule: Source Zone: Untrust-L3 Source IP: Any Destination Zone: DMZ Destination IP: 10.250.241.131

Updated Palo Alto Networks PCNSE Exam Dumps With Correct Questions and Answers