Authentic Nutanix NCP-MCI-5.20 Dumps [2022 Updated] For Nutanix Certified Professional (NCP) Certification

Eleanor2022-07-20T08:53:39+00:00

The NCP-MCI-5.20 Nutanix Certified Professional – Multicloud Infrastructure (NCP-MCI) 5.20 exam is the upgrade of NCP-MCI 5.15, which is a popular Nutanix Certified Professional (NCP) certification. A lot of Nutanix students are eager to be Nutanix Certified Professional – Multicloud Infrastructure (NCP-MCI) certified by passing the NCP-MCI-5.20 exam. The authentic NCP-MCI-5.20 dumps of ITPrepare can help you achieve success. ITPrepare Nutanix NCP-MCI-5.20 dumps include the most effective NCP-MCI-5.20 exam questions with valid answers so you can prepare and pass the Nutanix Certified Professional (NCP) NCP-MCI-5.20 exam in the initial attempt.

First To Read Nutanix NCP-MCI-5.20 Free Dumps Questions Below

Page 1 of 10

1. An administrator wants to make sure that the health of a cluster is in a good state.

Which command the utility will provide information related to the health of the cluster?

ncc

generic status

top

iostat

2. What is the default network bond setting for an AHV host configuration?

active-backup

active-active

balance-slb

balance-tcp

3. Which two private key types are supported by the Nutanix SSL certificate implementation? (Choose two.)

ECDSA

ECDH

ED25519

RSA

4. Which component ensures uniform distribution of data throughout the cluster to eliminate hot spots and speed up rebuilds?

Cassandra

Distributed Storage Fabric

High Availability

Acropolis App Mobility Fabric

5. An administrator has been alerted to a VM that has high I/O latency and wants to determine if there are any other factors, such as insufficient network or memory resources that correlate, as part of a troubleshooting process.

Which type of chart should the administrator create to allow all relevant data to be easily exported to CSV for later analysis?

A VM entity chart with each of the relevant metrics.

A cluster metric chart for each of the relevant metrics

A cluster entity chart with each of the relevant metrics

A VM metric chart for each of the relevant metrics

6. Which two capabilities does IPAM provide in a Nutanix networking configuration? (Choose two.)

Allows proxy server settings to be set up for a defined network

Allows AHV to assign IP addresses automatically to VMs using DHCP

Configures a VLAN with an IP subnet and assigns a group of IP addresses

Configures firewall rules to prevent or allow certain TCP/IP traffic

7. Which three configuration scenarios are valid for the deployment of Prism Central? (Choose three.)

Environments use Network Address Translation.

Prism Elements and Prism Central art in different subnets.

Environments do not have Internet access.

Prism Elements and Prism Central have proxy configured.

Environments use the 192.168.5.0/24 CVM management network.

8. The Stargate service becomes unavailable on a single CVM on an AHV node .

What is used to maintain I/O operations in the cluster?

Route injection

iSCSl redirector

Hypervisor HA

ha.py

9. How should an administrator enable secure access to Volumes using a password?

iSER

CHAP

SAML

LDAP

10. An administrator is managing a highly active SQL workload that is writing I/Os in 2 MB chunks to a vDisk. The administrator wants to optimize capacity setting for the computer.

Which storage optimization technology should the administration select to meet these requirement?

Erasure Coding

Compression

Capacity Deduplication

Cache Deduplication

Page 2 of 10

11. A customer has a 24-node cluster with all containers configured with RF3. Two different nodes have incurred a simultaneous HDD failure.

What is the result?

The cluster runs in a degraded state until the failed drives are replaced and the data has been restored to three replicas.

Sixty minutes after the failures a rebuild of the lost data can remaining HDDs begins to restore to three replicas.

The VMs with data on those drives crash, and an HA event occurs, restarting them on a remaining healthy node.

The Nutanix cluster recognizes the failures and immediately begins to rebuild lost data to three replicas.

12. Refer to the exhibit.

System Non-Root Partition Usage shows a warning or critical alert. The administrator needs to change the frequency of checks and alerts to respond more quickly.

Where in Prism Element should the administrator change the frequency of checks and alerts?

Health Dashboard > Manage Crocks > Frequency

Alerts Dashboard > Manage Checks > Schedule

Health Dashboard > Manage Checks > Schedule

Alerts Dashboard > Manage Checks > Frequency

13. A Nutanix cluster is equipped with four nodes. Four VMs on this cluster have been configured with a VM-VM anti-affinity policy and are each being hosted by a different node.

What occurs to the cluster and these VMs during an AHV upgrade?

One node hosts two VMs while the node being upgraded is in maintenance mode.

One VM out of the four powers down when the node hosting it reboots.

The AHV pre-upgrade checks fail until the administrator disables the anti-affinity policy.

The AHV pre-upgrade checks fail until the four VMs are powered off.

14. An administrator logs in to Prism Element goes to the Network view, and sees the output shown in the exhibit.

Which three steps must the administrator take to increase throughput to the host? (Choose three.)

Connect the 10Gb interfaces to the physical switch.

Change the bond mode to balance-slb or balance―tcp.

Remove any 1Gb interfaces still connected from the default bond.

Add a new switch to the network and connect 1Gb interfaces to it.

Change the VLAN ID to a higher priority I

15. When VM HA Reservation is enabled, what is the expected behavior for all failed VMs in the event of a host failure?

Restart on a best-effort basis if resources are available

Perform a live migration to other hosts in the AHV cluster

Restart on other hosts in the AHV cluster

Perform a live migration on a best-effort basis if resources are available

16. An administrator has a Custom backup application that requires a 2TB disk and runs m Windows. Throughput is considerably lower than expected.

The application was installed on a VM with the following configuration:

• FOU vCPUs with one core/vCPU

• 4GB of Memory

• One 50GB vDisk for the Windows installation

• One 2TB vDisk for the application

What is the recommended configuration change to improve throughput?

Add 4GB of memory to the VM

Increase the vCPUs assigned to the VM

Span the 2TB disk across four vDisks

Increase the number of cores per vCPU

17. 1.AHV IPAM assigns an IP address from the address pool when creating a managed VM NIC.

At which two instances does the address release back to the pool? (Choose two)

The IP address lease expires

The VM NIC is deleted.

The IP address is changed to static.

The VM is deleted.

18. In Nutanix clusters, which feature ensures VMs can be migrated and restarted on another host in case of failure?

High Availability

Protection Domain

Host Affinity Rules

Availability Zone

19. Which three cluster operations require an administrator to reclaim licenses?(Choose three)

Destroy a cluster.

Upgrade a cluster

Migrate a cluster

Remove a Node from a cluster

Move Nodes between clusters.

20. An administrator responsible for a VDl environment needs to investigate reports of slow logins. The administrator finds that increasing the number of vCPUs from 2 to 4 will reduce the login times. Production workloads are consuming 75% of the host CPU on the cluster. The administrator increases the vCPU count on all of the VDl VMs.

What are two impacts on the cluster? (Choose two)

Increasing CPU counts will decrease memory utilization

Increase memory utilization%

Increase CPU utilization%

Increase CPU ready%

Page 3 of 10

21. What is the name of the internal bridge used by AHV nodes and CVMs?

vnet0

br1

br0

virbr0

22. A customer has a newly-deployed AHV cluster with nodes that have 2.x 10 GBE and 2.x interface. The customer wants to use all available network interfaces to provide connectivity to the VMs.

Which option should the administrator use to achieve this while remaining consistent with Nutanix recommendations?

Create separate VLANs that map 10GbE and 1GbE interfaces.

Createbond1 on virbr0 and add the 1GbE interfaces to it for VM use.

Create a second bond on br0 on each host and assign the 1 GbE interfaces to it.

Create a second bridge on each host and assign the 1GbE interfaces to it.

23. An administrator needs to boot a VM to a bootable CD. The administrator tries to configure the VM to boot to it, select to add disk, and goes to the images available. The image for the bootable CD is unavailable.

What is the Likely issue?

The CD-ROM interface is too slow.

The administrator selected a disk attached before it can boot to a C

The VM needs to have a standard disk attached before it can boot to a C

The bootable CD image is corrupted during creation.

24. Which command should an administrator run from the CLI to view the uplink state of all AHV nodes in the cluster?

allssh show_uplinks

manage_ovs show_uplinks

allssh manage_ovs show_uplinks

manage ovs show uplinks

25. Which three upgrades should an administrator be able to perform using Lifecycle Management? (Choose Three)

AOS

BMC

BIOS

Hypervisor

HBA Firmware

26. When creating a VM on an AHV cluster, how is the initial placement of the VM determined?

AHV uses a round robin algorithm, placing new VMs onto hosts based on the numerical order of their UUID

The administrator right clicks on the desired host and selects Power on VM from the dropdown menu

The Acropolis Dynamic Scheduler selects a host which provides adequate resources for the VMs configuration

Placement is determined by the host that holds the new_VM token at the time of VM creation

27. An administrator wants to create a trunked interface on a VM on AOS 5.15x.

Which two steps should the administrator take first to achieve this? (Choose two)

Use acli

SSH to CV

Update VM dialog.

28. Which two methods should an administrator employ to set up the AHV host VLAN in a cluster to follow Nutanix recommendations? (Choose two)

Avoid adding guest VMs to the CVM and host VLA

Add all VMs to the default VLAN0 on bridge br1.

Add the CVM and the AHV host to the same VLA

Add all VMs to a new VLAN other than VLAN 0.

29. An administrator is adding a node with a higher AOS release to an existing cluster.

What is the most efficient action an administrator should take to ensure it is in a supported state?

Destroy cluster and foundation with the new node in place

Add the node to the cluster and leave the existing AOS version in place

Perform standalone reimage of the new node and then add to cluster

Add the node to the cluster and reboot all running VMs to use new release

30. How many Prism Central instances are required to deploy Leap:'

One per availability zone

One per customer environment

One per physical site

One per AHV cluster

Page 4 of 10

31. When configuring Prism Central, which two log modules are able to forward messages to an external syslog server? (Choose two.

API Audit

Flow

DNS

NTP Synchronization

32. Which two access protocols are supported by Files? (Choose two.)

ISCSI

SMB

FCOE

NFS

33. Stop the Nutanix clusters.

34. A vDisk is read by multiple VMs. The cluster creates immutable copies of the vDisk .

What are these vDisk copies called?

Disk Clones

Golden Images

Volume Groups

Shadow Clones

35. Prism Central will be installed manually on an AHV cluster.

Which three disk images must be downloaded from the portal for the Prism Central VM? (Choose three.)

var

tmp

boot

home

data

36. Which method can be used to migrate a VM configured for UEFI-boot from a Nutanix Hyper-V cluster to AHV?

Live Migration

Storage vMotion

Nutanix Move

Cloud Connect

37. How will an HDD failure affect VMs with data on the failed device?

The VMs will crash, and will be restarted once the failed HDD has been replaced and the data has been restored.

A live migration will be initiated, moving the affected VMs to a host that contains the replica data.

The VMs will remain operational on that host and continue to function normally with no noticeable impact

An HA event will occur, causing the affected VMs to restart on a node that contains the replica data.

38. A VM in a 12-node Nutanix cluster is hosting an application that has specific Physical GPU requirements. Only three nodes in the cluster meet this requirement.

The administrator wants to allow a general workload to be distributed across all nodes in the cluster and must make sure that the node hosting the VM meets its requirements.

How should the administrator perform this task?

Create a sperate three-node cluster using the nodes that meet the requirement.

Configure VM-Host affinity for the nodes that meet the application's GPU requirement.

Over-Provision the application VM with additional virtual GPUs.

Configure anti-affinity rules between the application VM and the other VMs running on the cluster.

39. A configuration is single domain, single forest, and does not use SSL.

Which port number should be used to configure LDAP?

389

3269

636

3268

40. In Files, how many FSVMs are deployed by default?

Page 5 of 10

41. An administrator is implementing a VDI solution. The workload will be a series of persistent desktops in a dedicated storage container within a four-node cluster Storage optimizations should be set on the dedicated storage container to give optimal performance including during a node failure event.

Which storage optimizations should the administrator set to meet the requirements?

Compression only

Deduplication and Erasure Coding

Compressoion and Deduplication

Compression Deduplication and Erasure Coding

42. An administrator wants to use Volumes to connect to physical servers that are not able to be virtualized.

Which three things must be configured for Volumes to support iSCSI clients? (Choose three)

Enable external client access

Client OS iSCSI initiator

iSCSI Multipathing I/O

Cluster Virtual IP address

Data Services IP address

43. Which change can be made on a cluster with software-based Data-at-Rest Encryption enabled?

Disable encryption on the cluster

Deploy an additional Native KMS Server

Enable encryption for a VM

Change Native KMS to External KMS

44. HOTSPOT

Async DR is configured between two sites. A network outage occurs at the primary site.

Which steps must the administrator perform to bring the VMs back into service at the backup site?

Item instructions: For each procedure, indicate the order in which that procedure must take place to meet the item requirements. Not all procedures are valid. Identify any invalid procedures using the drop-down option.

45. An administrator has set up a local web server accessible to the Nutanix clusters.

Which two steps are required to set up LCM for an environment without Internet access? (Choose two.)

Download the lcai_disconnecced_version. tar.gz LCM bundle from the support portal.

Edit LCM Advanced Settings in Prism Element and enter the address of the web server.

Edit LCM Advanced Settings m Prism Central and enter the address of the web server.

Download the lcm_dark_site_version. tar . gz LCM bundle from the support portal.

46. A cluster has RF2. The cluster loses two drives on different nodes in the same storage tier.

What is the effect on the replicas of the VMs?

Some VM data may be lost

No VMs lose data if the node has two or more SSDs

Some VMs may reboot and gain access to data

No VMs lose data because of RF2

47. A guest VM should be able to tolerate simultaneous failure of two nodes or drives.

What are the minimum requirements for the Nutanix cluster?

3 nodes with cluster RF 3 and container RF 3

3 nodes with cluster RF 3 and container RF 2

5 nodes with cluster RF 2 and container RF 3

5 nodes with cluster RF 3 and container RF 3

48. An administrator needs to bring down a host in a Nutanix Cluster for maintenance reasons.

The administrator puts the host in maintenance mode.

What should the administrator do to perform an orderly shutdown of the CVM?

Execute the cvm_shutdown -P new command from the CV

Enter Fever off Server - immediate from the IPMI console.

Enter Fewer off Server-orderly Shutdown from the IPMI console.

Execute the cvm_shutdown -P now command from the host.

49. Which node type does not deploy a Nutanix Controller VM?

Storage Only

Hyper Converged

Compute Only

All Flash

50. In a Nutanix Cluster, l/Os are served by the host where the VM is running

Which Nutanix feature does this describe?

Data Resiliency

Data Locality

Distributed File System

Distributed Storage Fabric

Page 6 of 10

51. What requires iSCSI initiator configuration in the guest OS to use Volumes?

SQL Server Always On Availability Group

Microsoft Windows Failover Cluster

Oracle RAC

Exchange DAG

52. In which two scenarios is an automated live migration likely to occur? (Choose two)

Cluster resource hotspot

AOS upgrade

Network upgrade

Hypervisor upgrade

53. In which two scenarios is Native Key Management Server supported? (Choose two)

XenServer and AHV mixed cluster.

Hyper-V and AHV mixed cluster.

KVM and AHV mixed cluster.

ESXi and AHV mixed cluster.

54. How should an administrator correct an SSL error when connecting to a Nutanix cluster?

Add the SSL certificate to the workstation’s trusted people store

Create a new self-signed certificate for the cluster with a 4096 bit key

Create a new SSL certificate for the cluster signed by an AD certificate authority

Add the SSL certificate to an AD group policy applied to all computer objects

55. HOTSPOT

What is the proper sequence to perform a one-click upgrade to a Nutanix cluster?

Item instructions: For each procedure, indicate the order in which that procedure must take place to meet the item requirements. Not all procedures are valid. Identify any invalid procedures using the drop-down option.

56. The administrator wants a container to be displayed and limited to 1TB in the hypervisor.

What advanced container setting must the administrator set?

Advertised Capacity

Reserved Capacity

Advertised Quota

Reserved Quota

57. The Linux administration team has requested access rights to any current or future Linux VM in the environment

What entity should be selected when assigning this new role?

Image

AHV Cluster

Category

Project

58. What is the expected behavior of the VMs residing on that host when a controller VM becomes unavailable?

A Live Migration will be performed on the affected VMs.

The host will automatically redirect I/O and VMs will continue running.

The impacted host and VMs will automatically shut down.

VM High Availability will restart the impacted VMs on another host

59. Which algorithm do snapshots and clones leverage to maximize efficiency and effectiveness?

Continuous Data Protection

Copy-on-Write

Split-mirror

Redirect-On-Write

60. Where can an administrator change a CVM password?

KMS Server Terminal

CVM setting in Prism Element

CVM setting in Prism Central

Prism CVM VM Console

Page 7 of 10

61. An administrator is configuring cross-hypervisor DR from an ESXi cluster to a new AHV cluster. When the administrator migrates a protection domain to the AHV cluster, the VMs fail to boot.

What should the administrator do to correct this problem?

Increase the snapshot frequency to more than 6 hours.

Uninstall VMware Tools from the VMs.

Install Nutanix Guest Tools in the protected VMs.

Add all VMs into a single consistency group.

62. An administrator needs to run a mixed Exchange and SQL workload with a guaranteed amount of container space for each application.

How should the administrator meet this requirement?

Create one container and set capacity reservation

Create two containers and reserve space for containers

Create one container and enable compression

Create two containers and reserve space for vDisks

63. What is the expected operation during node addition when the new node has a different AOS version?

The entire cluster is upgraded to the latest one-click release.

The node is added and a separate upgrade operation must be performed.

The addition fails and forces the administrator to image using standalone Foundation.

The node is automatically re-imaged using the software currently running in the cluster.

64. Refer to Exhibit.

An administrator increases the cluster RF to 3. The containers are not modified.

What will the new values in the data resiliency dashboard be for FAILURES TOLERABLE for the Zookeeper and Extent Groups components?

Zookeeper = 1 and Extent Groups = 1

Zookeeper = 2 and Extent Groups = 2

Zookeeper = 2 and Extent Groups = 1

Zookeeper = 1 and Extent Groups = 2

65. An administrator needs to relocate an AHV cluster to a new datacenter during a maintenance window. The cluster will use the same IPs in the new datacenter.

Which two steps should be taken to prepare for this task? (Choose two.)

Reconfigure IPMI for the new datacenter

Shut down all user VMs in the cluster

Relocate the linked LDAP server

Stop all Nutanix Files clusters

66. Refer to the exhibit.

The Linux Admin role has been created to manage only Linux VMs in the environment.

However, the Admin1 user does not have access to all Linux VMs.

What step should be taken to grant the proper access?

Add the hosts to the entities KM for the role.

Grant the admin1 user the viewer role (or the cluster.

Add the role to the Linux images.

Add the proper category to each Linux V

67. An administrator is working with Nutanix Support and needs to provide logs for troubleshooting an issue. The cluster is located in a secure environment. Data such as IP addresses and VM names cannot be shared.

Which method should be used to anonymize the log data sent to Nutanix Support?

A)

Option A

Option B

Option C

Option D

68. Where are Leap Availability Zones configured?

Cloud Connect

Controller VM

Prism Element

Prism Central

69. The customer is seeing high memory utilization on a mission critical VM. Users report that the application is unavailable. The guest OS does not support hot add components.

How should the administrator fix this issue?

Access the CVM on the host that is running the VM: * Open acli * Run a command to increase the amount of RAM assigned to the VM

From the Prism web console: * Go to the VM dashboard * Select the VM from the VMs list * Choose Update * Adjust the amount of memory assigned to the VM

Go to Control Panel in the VM: * Select the Computer Properties * Increase the amount of RAM assigned

During the next maintenance window: * Select the VM from the VMs list * Perform a graceful shutdown

70. When installing Nutanix Guest Tools (NGT) on an ESXi-hosted VM, which port should be enabled on the VM to allow communication with the NGT-Controller VM service?

2000

2074

8080

9943

Page 8 of 10

71. An administrator is commissioning a Nutanix Enterprise Cloud. Once the user VMs have been deployed and are running, the administrator finds that VMs on the same host are able to communicate, but are unable to communicate between hosts.

What must be changed to enable full inter-VM communications?

Change the spanning-tree port type on the switch.

Change the network the VMs are connected to

Update the switch to specifically allow VLAN 15

The VMs need to have static IP addresses.

72. Which two methods are available when migrating a VM from a legacy 3-tier solution using VMware ESXi to AHV? (Choose two.)

Deploy the Move appliance.

Use Cross-Hypervisor D

Import the .vmdk into the Image Service.

Use shared nothing live migration.

73. In a default configuration of an AHV cluster, a single node fails.

What happens to the running VMs on that node?

The cluster restarts all VMs in the event of a host failure

The VMs do a live migration to the master node in the cluster

The VMs do a live migration to any other node in the cluster

The cluster attempts to restart VMs on other hosts

74. What is Prism Central primarily used for?

Multi-cluster network configuration

Container creation

Multi-cluster Single Sign On

Data reduction configuration

75. A two-node ROBO cluster is configured with a witness VM.

What happens when Node A goes down?

The- cluster becomes unavailable and goes into read-only mode.

All operations and services on the Node B are shut down and go into a waiting state.

The cluster is unaffected and no administrator intervention is required.

Node B sends a leadership request to the Witness VM and goes into single-node mode.

76. A customer has a 4-node cluster running at 80% capacity. One node fails due to a motherboard issue.

What is the effect?

The cluster continues to run but in a degraded state.

Zeus becomes available after 60 minutes.

Zeus becomes unavailable for 30 minutes.

The cluster continues to run normally.

77. An administrator notices that most of the VMs in the cluster are on one host. Users report that an application seems to respond slowly. The application server VM has significantly more memory assigned to it than other VMs.

How should the administrator fix this issue?

Reduce the amount of memory assigned to the V

Migrate the VM to a different host.

Add more memory to the V

Increase the memory on the CV

78. What are two minimum prerequisites for live migration to succeed? (Choose two.)

All AHV hosts have IP addresses in the same subnet

All AHV hosts must be configured on the same VLAN

All VMs have an IP address in the same subnet

All VMs are configured for the same VLAN

79. A system administrator needs to add more VMs to their Nutanix cluster.

Which two actions should the administrator perform to determine if the current cluster can accommodate the new VMs? (Choose two)

Enable Deduplication and Ensure Coding

Utilize Optimize Resources for VM efficiency

Determine utilization with Cluster Runway

Perform an inventory with Life Cycle Management

80. Which data savings technique utilizes stripes and parity calculation in a Nutanix cluster?

Compression

Parity strip

Erasure coding

Deduplication

Page 9 of 10

81. What is the function of the virbr0 bridge on AHV?

To carry all traffic between the user VMs and the upstream network.

To carry management and storage communication between user VMs and the CV

To carry management and storage communication between user VMs and AHV host.

To carry storage communication between the guest VMs and the CVM

82. An administrator needs to report on any alerts generated by a Nutanix cluster that affected the cluster's availability over the past 10 days.

Which method should be used to locate these events?

On the Health dashboard, use the Log Collector to export data based on time stamp.

Export the cluster event log to a CSV on the Alerts dashboard.

On the Alerts dashboard, filter based on Impact Type and the desired Time Range.

Configure an Alert Policy to generate an email with the data on the Health dashboard.

83. How many SSL certificates are used by Prism Element on a Nutanix cluster?

256

2048

84. An administrator migrates a VM onto a new Nutanix cluster- After the migration, the administrator observes the following conditions:

• Cluster memory utilization: 64%

• Cluster CPU utilization: 19%

• Cluster storage utilization. 32%

• Average VM CPU utilization: 25%

• Average VM CPU ready%: 24%

• Average VM memory utilization: 60%

Which two changes should the administrator make to improve VM performance? (Choose two.)

Reduce the number of vCPUs assigned to VMs.

Add more memory to the VMs.

Reduce the number of VMs on the hosts.

Replace high core count CPUs with high clock rate CPUs.

85. An administrator is reviewing performance of a core banking system that routinely has 20,000 concurrent users. During business hours, the CPU on the applications servers runs at close to 100%. The administrator needs to determine if there is a performance issue specific to the app servers, the database servers, or all servers on the cluster.

Which metrics should the administrator review in Prism Analytics Graphs?

Cluster CPU and Memory Only

Cluster IO, Network, Database and App Server CPU

Cluster IO, CPU, Memory and Database and App Server CPU

Cluster IO, CPU, Memory, Network, App Server CPU

86. A Nutanix administrator needs to replace a self-signed SSL certificate with a CA generated certificate in Prism.

Which three files are required to install the CA generated certificate in Prism? (Choose three)

CA Certificate or Chain (ca_chain_certs.cer)

Public Certificate (PublicCert.ker)

Certificate Signing Request (server.csr)

Private Server Key (private_server.key)

Public Server Key (public_server.key)

87. An administrator adds a node with older generation processors to an existing AHV cluster with newer generation processors .

What is the effect on live migration?

Live migration continues to function as expected and VMs can move to any AHV host.

Live migration is prevented until the administrator enables the legacy migration option.

Live migration is prevented until the administrator manually changes the newer processor level.

Live migration of VMs is prevented between newer and older processors.

88. Which best practice should be followed when creating a bond in a Nutanix cluster?

Place NICs of different speeds within the same bond

Configure the bond to use LACP

Only utilize NICs of the same speed within the same bond

Use the default bond configuration after installation

89. An Administrator is working on a one-node ROBO cluster configurations

Which statement is true for this configuration?

Witness vm required to break cluster quoram

Supported hardware is NX-1175-G5 and G6

witness vm should be 8vcp and 20gb ram

the minimum RPO 8 hours required

90. CPU utilization climbs above 90% on several VMs. This causes performance degradation for a business-critical application.

How can alerts be configured to notify the administrator before VM CPU utilization hits 90%?

On a CVM, use ncli to set the VM CPU Check threshold for the critical VMs to a value below 90%.

On the Health dashboard, locate the VM CPU Check and lower the alert threshold below 90%.

On a CVM, configure a cron job to run the VM CPU Check more frequently and email the result.

On the Alerts dashboard, ensure that the VM CPU usage alert is not set to auto-resolve.

Page 10 of 10

91. Where should an administrator unregister Prism Element from Prism Central?

From a Host SSH session

From the Prism Central web console

From the Prism Element web console

From a CVM SSH session

92. An administrator wants to have a VM on an AHV cluster with access to multiple VLANs .

What is the most efficient way to achieve this?

Update a vNIC on the VM to operate in trunked mode for all desired VLANs.

Create a network in AHV associated with all those VLANs on all hosts.

Use SFPs that allow the needed VLANs.

Use one vNIC per VLAN for the V

93. HOTSPOT

An administrator needs to shut down an AHV cluster to relocate hardware. The administrator upgrades NCC and runs health checks.

Which steps should the administrator perform next?

Item instructions: For each procedure, indicate the order in which that procedure must take place to meet the item requirements.

94. Microsegmentation was recently enabled in a Nutanix environment. The administrator wants to leverage Prism Central to create a policy that will block all traffic regardless of direction, between two groups of VMs identified by their category.

Which policy should be used to meet this requirement?

An Application Security Policy

A Quarantine Policy

A Whitelist-Based Policy

An Isolation Environment Policy

95. A customer wants to isolate a group of VMs within their Nutanix environment for security reasons. The customer creates a VM with two NICs to act as a firewall and installs the appropriate software and certificates.

However, no one from the outside can access the application.

What is the likely cause of this problem?

A shared volume group must be used by all isolated VMs

More than one NIC cannot be added to a VM

One of the NICs needs to be configured on the internal VLAN

Wireshark is installed on the NAT VM

96. An administrator is reviewing performance of a core banking system that routinely has 20,000 concurrent users. During, business hours, the CPU on the applications servers runs at close to 100%. The administrator needs to determine if there is a performance issue specific to the app servers, the database servers, or all servers on the cluster.

Which metrics should the administrator review in Prism Analysis Graphs?

Cluster IO, Network, Database and App Server CPU

Cluster CPU and Memory Only

Cluster IO, CPU, Memory and Database and App Server CPU

Cluster IO, CPU, Memory, Network, App Server CPU

97. How should an administrator configure a custom alert for a specific VM in Prism?

Modify an existing alert to only alert on the specific V

Modify VM settings to add the custom alert.

Modify the alerts to add a new custom alert policy.

Modify node settings to add the custom alert.

98. An administrator needs to deploy an application with a large amount of data connected via Nutanix volumes.

Which two actions should the administrator take when designing the Volume Group? (Choose two.)

Distribute workload across multiple virtual disks

Enable RSS (Receive Side Scaling)

Use multiple subnets for iSCSI traffic

Enable thick provisioning on the Volume Group(s)

99. An administrator is configuring data protection and DR for a multi-tier application. All VMs must be protected at the same time.

What must the administrator do to meet this requirement?

Create a consistency group for each VM with identical schedules

Create a consistency group for the application and place all VMs in it

Create a protection domain for the application and select auto-protect related entities

Create a protection domain for each VM with identical schedules

100. A node with Erasure Coding fails.

What is the impact?

The node stops utilizing Erasure Coding.

Potentially increased amount of data stored in the SSD tier.

Increased Controller VM CPU Load.

AQS unable to do deduplication during the Erasure Coding failure.

Authentic Nutanix NCP-MCI-5.20 Dumps [2022 Updated] For Nutanix Certified Professional (NCP) Certification