Updated 156-315.81 Exam Dumps - Real to Pass Check Point Certified Security Expert R81 Exam

Updated 156-315.81 Exam Dumps – Real to Pass Check Point Certified Security Expert R81 Exam

Eleanor2024-10-14T15:23:43+00:00

By Eleanor CCSE, Check Point

Are you thinking to pass the 156-315.81 Check Point Certified Security Expert R81 certification exam successfully? You can have the most updated 156-315.81 exam dumps of ITPrepare as the preparation materials.

Updated 156-315.81 Exam Dumps Features | ITPrepare

Exam Code: 156-315.81
Exam Name: Check Point Certified Security Expert R81
Exam Certification: CCSE
Exam Version: V9.02
Exam Q&As: 506
Exam Format: PDF

The top team of ITPrepare has updated the Check Point 156-315.81 exam dumps with great questions and answers based on the latest exam objectives. We provide the verified CheckPoint 156-315.81 real questions and answers that are important for clearing the 156-315.81 Check Point Certified Security Expert R81 Exam.

Read 156-315.81 Free Dumps Demo Questions Here To Check The Updated Dumps

Page 1 of 10

1. Which is the least ideal Synchronization Status for Security Management Server High Availability deployment?

Synchronized

Never been synchronized

Lagging

Collision

2. In R81, how do you manage your Mobile Access Policy?

Through the Unified Policy

Through the Mobile Console

From SmartDashboard

From the Dedicated Mobility Tab

3. Which of these statements describes the Check Point ThreatCloud?

Blocks or limits usage of web applications

Prevents or controls access to web sites based on category

Prevents Cloud vulnerability exploits

A worldwide collaborative security network

4. What is a feature that enables VPN connections to successfully maintain a private and secure VPN session without employing Stateful Inspection?

Stateful Mode

VPN Routing Mode

Wire Mode

Stateless Mode

5. Selecting an event displays its configurable properties in the Detail pane and a description of the event in the Description pane.

Which is NOT an option to adjust or configure?

Severity

Automatic reactions

Policy

Threshold

6. How can SmartView application accessed?

http://<Security Management IP Address>/smartview

http://<Security Management IP Address>:4434/smartview/

https://<Security Management IP Address>/smartview/

https://<Security Management host name>:4434/smartview/

7. During inspection of your Threat Prevention logs you find four different computers having one event each with a Critical Severity.

Which of those hosts should you try to remediate first?

Host having a Critical event found by Threat Emulation

Host having a Critical event found by IPS

Host having a Critical event found by Antivirus

Host having a Critical event found by Anti-Bot

8. Which command collects diagnostic data for analyzing customer setup remotely?

cpinfo

migrate export

sysinfo

cpview

9. You have successfully backed up Check Point configurations without the OS information.

What command would you use to restore this backup?

restore_backup

import backup

cp_merge

migrate import

10. Check Pont Central Deployment Tool (CDT) communicates with the Security Gateway / Cluster Members over Check Point SIC _______ .

TCP Port 18190

TCP Port 18209

TCP Port 19009

TCP Port 18191

Page 2 of 10

11. The Security Gateway is installed on GAIA R81. The default port for the Web User Interface is ______ .

TCP 18211

TCP 257

TCP 4433

TCP 443

12. Which view is NOT a valid CPVIEW view?

IDA

RAD

PDP

VPN

13. Tom has been tasked to install Check Point R81 in a distributed deployment. Before Tom installs the systems this way, how many machines will he need if he does NOT include a SmartConsole machine in his calculations?

One machine, but it needs to be installed using SecurePlatform for compatibility purposes.

One machine

Two machines

Three machines

14. Which CLI command will reset the IPS pattern matcher statistics?

ips reset pmstat

ips pstats reset

ips pmstats refresh

ips pmstats reset

15. Sticky Decision Function (SDF) is required to prevent which of the following? Assume you set up an Active-Active cluster.

Symmetric routing

Failovers

Asymmetric routing

Anti-Spoofing

16. Which of the following process pulls application monitoring status?

fwd

fwm

cpwd

cpd

17. Which command is used to set the CCP protocol to Multicast?

cphaprob set_ccp multicast

cphaconf set_ccp multicast

cphaconf set_ccp no_broadcast

cphaprob set_ccp no_broadcast

18. You want to gather and analyze threats to your mobile device. It has to be a lightweight app.

Which application would you use?

SmartEvent Client Info

SecuRemote

Check Point Protect

Check Point Capsule Cloud

19. Which command would disable a Cluster Member permanently?

clusterXL_admin down

cphaprob_admin down

clusterXL_admin down-p

set clusterXL down-p

20. The Event List within the Event tab contains:

a list of options available for running a query.

the top events, destinations, sources, and users of the query results, either as a chart or in a tallied list.

events generated by a query.

the details of a selected event.

Page 3 of 10

21. There are 4 ways to use the Management API for creating host object with R81 Management API.

Which one is NOT correct?

Using Web Services

Using Mgmt_cli tool

Using CLISH

Using SmartConsole GUI console

Events are collected with SmartWorkflow from Trouble Ticket systems

22. Fill in the blank: The R81 feature _____ permits blocking specific IP addresses for a specified time period.

Block Port Overflow

Local Interface Spoofing

Suspicious Activity Monitoring

Adaptive Threat Prevention

23. Your manager asked you to check the status of SecureXL, and its enabled templates and features.

What command will you use to provide such information to manager?

fw accel stat

fwaccel stat

fw acces stats

fwaccel stats

24. Fill in the blank: The command ___________________ provides the most complete restoration of a R81 configuration.

upgrade_import

cpconfig

fwm dbimport -p <export file>

cpinfo Crecover

25. What is the difference between an event and a log?

Events are generated at gateway according to Event Policy

A log entry becomes an event when it matches any rule defined in Event Policy

Events are collected with SmartWorkflow form Trouble Ticket systems

Log and Events are synonyms

26. What are the different command sources that allow you to communicate with the API server?

SmartView Monitor, API_cli Tool, Gaia CLI, Web Services

SmartConsole GUI Console, mgmt_cli Tool, Gaia CLI, Web Services

SmartConsole GUI Console, API_cli Tool, Gaia CLI, Web Services

API_cli Tool, Gaia CLI, Web Services

27. Which method below is NOT one of the ways to communicate using the Management API’s?

Typing API commands using the “mgmt_cli” command

Typing API commands from a dialog box inside the SmartConsole GUI application

Typing API commands using Gaia’s secure shell(clish)19+

Sending API commands over an http connection using web-services

28. Full synchronization between cluster members is handled by Firewall Kernel.

Which port is used for this?

UDP port 265

TCP port 265

UDP port 256

TCP port 256

29. If you needed the Multicast MAC address of a cluster, what command would you run?

cphaprob Ca if

cphaconf ccp multicast

cphaconf debug data

cphaprob igmp

30. Which command shows actual allowed connections in state table?

fw tab Ct StateTable

fw tab Ct connections

fw tab Ct connection

fw tab connections

Page 4 of 10

31. The fwd process on the Security Gateway sends logs to the fwd process on the Management Server via which 2 processes?

fwd via cpm

fwm via fwd

cpm via cpd

fwd via cpd

32. Which of the following Check Point processes within the Security Management Server is responsible for the receiving of log records from Security Gateway?

logd

fwd

fwm

cpd

33. When requiring certificates for mobile devices, make sure the authentication method is set to one of the following, Username and Password, RADIUS or ________.

SecureID

SecurID

Complexity

TacAcs

34. 1.Which of the following authentication methods ARE NOT used for Mobile Access?

RADIUS server

Username and password (internal, LDAP)

SecurID

TACACS+

35. Which Mobile Access Application allows a secure container on Mobile devices to give users access to internal website, file share and emails?

Check Point Remote User

Check Point Capsule Workspace

Check Point Mobile Web Portal

Check Point Capsule Remote

36. Which statement is correct about the Sticky Decision Function?

It is not supported with either the Performance pack of a hardware based accelerator card

Does not support SPI’s when configured for Load Sharing

It is automatically disabled if the Mobile Access Software Blade is enabled on the cluster

It is not required L2TP traffic

37. What are the three components for Check Point Capsule?

Capsule Docs, Capsule Cloud, Capsule Connect

Capsule Workspace, Capsule Cloud, Capsule Connect

Capsule Workspace, Capsule Docs, Capsule Connect

Capsule Workspace, Capsule Docs, Capsule Cloud

38. What Factor preclude Secure XL Templating?

Source Port Ranges/Encrypted Connections

IPS

ClusterXL in load sharing Mode

CoreXL

39. What command verifies that the API server is responding?

api stat

api status

show api_status

app_get_status

40. Which TCP-port does CPM process listen to?

18191

18190

8983

19009

Page 5 of 10

41. SSL Network Extender (SNX) is a thin SSL VPN on-demand client that is installed on the remote user’s machine via the web browser.

What are the two modes of SNX?

Application and Client Service

Network and Application

Network and Layers

Virtual Adapter and Mobile App

42. Which is NOT an example of a Check Point API?

Gateway API

Management API

OPSC SDK

Threat Prevention API

43. What is the correct command to observe the Sync traffic in a VRRP environment?

fw monitor Ce “accept[12:4,b]=224.0.0.18;”

fw monitor Ce “accept port(6118;”

fw monitor Ce “accept proto=mcVRRP;”

fw monitor Ce “accept dst=224.0.0.18;”

44. Which packet info is ignored with Session Rate Acceleration?

source port ranges

source ip

source port

same info from Packet Acceleration is used

45. What has to be taken into consideration when configuring Management HA?

The Database revisions will not be synchronized between the management servers

Smart Console must be closed prior to synchronized changes in the objects database

If you wanted to use Full Connectivity Upgrade, you must change the Implied Rules to allow FW1_cpredundant to pass before the Firewall Control Connections.

For Management Server synchronization, only External Virtual Switches are supported. So, if you wanted to employ Virtual Routers instead, you have to reconsider your design.

46. Which command lists all tables in Gaia?

fw tab Ct

fw tab Clist

fw-tab Cs

fw tab -1

47. Check Point Management (cpm) is the main management process in that it provides the architecture for a consolidates management console. CPM allows the GUI client and management server to communicate via web services using ___________.

TCP port 19009

TCP Port 18190

TCP Port 18191

TCP Port 18209

48. To help SmartEvent determine whether events originated internally or externally you must define using the Initial Settings under General Settings in the Policy Tab.

How many options are available to calculate the traffic direction?

5 Network; Host; Objects; Services; API

3 Incoming; Outgoing; Network

2 Internal; External

4 Incoming; Outgoing; Internal; Other

49. CoreXL is supported when one of the following features is enabled:

Route-based VPN

IPS

IPv6

Overlapping NAT

50. Session unique identifiers are passed to the web api using which http header option?

X-chkp-sid

Accept-Charset

Proxy-Authorization

Application

Page 6 of 10

51. Which features are only supported with R81.10 Gateways but not R77.x?

Access Control policy unifies the Firewall, Application Control & URL Filtering, Data Awareness, and Mobile Access Software Blade policies.

Limits the upload and download throughput for streaming media in the company to 1 Gbps.

The rule base can be built of layers, each containing a set of the security rules. Layers are inspected in the order in which they are defined, allowing control over the rule base flow and which security functionalities take precedence.

Time object to a rule to make the rule active only during specified times.

52. Automatic affinity means that if SecureXL is running, the affinity for each interface is automatically reset every

15 sec

60 sec

5 sec

30 sec

53. Check Point Management (cpm) is the main management process in that it provides the architecture for a consolidated management console. It empowers the migration from legacy Client-side logic to Server-side logic.

The cpm process:

Allow GUI Client and management server to communicate via TCP Port 19001

Allow GUI Client and management server to communicate via TCP Port 18191

Performs database tasks such as creating, deleting, and modifying objects and compiling policy.

Performs database tasks such as creating, deleting, and modifying objects and compiling as well as policy code generation.

54. What is true about the IPS-Blade?

In R81, IPS is managed by the Threat Prevention Policy

In R81, in the IPS Layer, the only three possible actions are Basic, Optimized and Strict

In R81, IPS Exceptions cannot be attached to “all rules”

In R81, the GeoPolicy Exceptions and the Threat Prevention Exceptions are the same

55. When doing a Stand-Alone Installation, you would install the Security Management Server with which other Check Point architecture component?

None, Security Management Server would be installed by itself.

SmartConsole

SecureClient

Security Gateway

SmartEvent

56. Fill in the blank: The R81 utility fw monitor is used to troubleshoot ______________________.

User data base corruption

LDAP conflicts

Traffic issues

Phase two key negotiations

57. What happen when IPS profile is set in Detect Only Mode for troubleshooting?

It will generate Geo-Protection traffic

Automatically uploads debugging logs to Check Point Support Center

It will not block malicious traffic

Bypass licenses requirement for Geo-Protection control

58. SandBlast Mobile identifies threats in mobile devices by using on-device, network, and cloud-based algorithms and has four dedicated components that constantly work together to protect mobile devices and their data.

Which component is NOT part of the SandBlast Mobile solution?

Management Dashboard

Gateway

Personal User Storage

Behavior Risk Engine

59. Fill in the blank: The tool _____ generates a R81 Security Gateway configuration report.

infoCP

infoview

cpinfo

fw cpinfo

60. In a Client to Server scenario, which inspection point is the first point immediately following the tables and rule base check of a packet coming from outside of the network?

Big l

Little o

Little i

Big O

Page 7 of 10

61. What are the attributes that SecureXL will check after the connection is allowed by Security Policy?

Source address, Destination address, Source port, Destination port, Protocol

Source MAC address, Destination MAC address, Source port, Destination port, Protocol

Source address, Destination address, Source port, Destination port

Source address, Destination address, Destination port, Protocol

62. On R81.10 when configuring Third-Party devices to read the logs using the LEA (Log Export API) the default Log Server uses port:

18210

18184

257

18191

63. How many images are included with Check Point TE appliance in Recommended Mode?

2(OS) images

images are chosen by administrator during installation

as many as licensed for

the most new image

64. Which command will allow you to see the interface status?

cphaprob interface

cphaprob CI interface

cphaprob Ca if

cphaprob stat

65. The CPD daemon is a Firewall Kernel Process that does NOT do which of the following?

Secure Internal Communication (SIC)

Restart Daemons if they fail

Transfers messages between Firewall processes

Pulls application monitoring status

66. Identify the API that is not supported by Check Point currently.

R81 Management API-

Identity Awareness Web Services API

Open REST API

OPSEC SDK

67. To fully enable Dynamic Dispatcher on a Security Gateway:

run fw ctl multik set_mode 9 in Expert mode and then Reboot.

Using cpconfig, update the Dynamic Dispatcher value to “full” under the CoreXL menu.

Edit/proc/interrupts to include multik set_mode 1 at the bottom of the file, save, and reboot.

run fw multik set_mode 1 in Expert mode and then reboot.

68. What is the mechanism behind Threat Extraction?

This a new mechanism which extracts malicious files from a document to use it as a counter-attack against its sender.

This is a new mechanism which is able to collect malicious files out of any kind of file types to destroy it prior to sending it to the intended recipient.

This is a new mechanism to identify the IP address of the sender of malicious codes and put it into the SAM database (Suspicious Activity Monitoring).

Any active contents of a document, such as JavaScripts, macros and links will be removed from the document and forwarded to the intended recipient, which makes this solution very fast.

69. The Firewall Administrator is required to create 100 new host objects with different IP addresses.

What API command can he use in the script to achieve the requirement?

add host name <New HostName> ip-address <ip address>

add hostname <New HostName> ip-address <ip address>

set host name <New HostName> ip-address <ip address>

set hostname <New HostName> ip-address <ip address>

70. Advanced Security Checkups can be easily conducted within:

Reports

Advanced

Checkups

Views

Summary

Page 8 of 10

71. Which command can you use to enable or disable multi-queue per interface?

cpmq set

Cpmqueue set

Cpmq config

St cpmq enable

72. What is the limitation of employing Sticky Decision Function?

With SDF enabled, the involved VPN Gateways only supports IKEv1

Acceleration technologies, such as SecureXL and CoreXL are disabled when activating SDF

With SDF enabled, only ClusterXL in legacy mode is supported

With SDF enabled, you can only have three Sync interfaces at most

73. Which of the following type of authentication on Mobile Access can NOT be used as the first authentication method?

Dynamic ID

RADIUS

Username and Password

Certificate

74. Which command can you use to verify the number of active concurrent connections?

fw conn all

fw ctl pstat

show all connections

show connections

75. What is not a component of Check Point SandBlast?

Threat Emulation

Threat Simulator

Threat Extraction

Threat Cloud

76. What makes Anti-Bot unique compared to other Threat Prevention mechanisms, such as URL Filtering, Anti-Virus, IPS, and Threat Emulation?

Anti-Bot is the only countermeasure against unknown malware

Anti-Bot is the only protection mechanism which starts a counter-attack against known Command & Control Centers

Anti-Bot is the only signature-based method of malware protection.

Anti-Bot is a post-infection malware protection to prevent a host from establishing a connection to a Command & Control Center.

77. ESTION NO: 10

Which two of these Check Point Protocols are used by SmartEvent Processes?

ELA and CPD

FWD and LEA

FWD and CPLOG

ELA and CPLOG

78. You are working with multiple Security Gateways enforcing an extensive number of rules. To simplify security administration, which action would you choose?

Eliminate all possible contradictory rules such as the Stealth or Cleanup rules.

Create a separate Security Policy package for each remote Security Gateway.

Create network objects that restricts all applicable rules to only certain networks.

Run separate SmartConsole instances to login and configure each Security Gateway directly.

79. Which of the SecureXL templates are enabled by default on Security Gateway?

Drop

NAT

None

80. Post-Automatic/Manual NAT rules

1, 2, 3, 4

1, 4, 2, 3

3, 1, 2, 4

4, 3, 1, 2

Page 9 of 10

81. CPM process stores objects, policies, users, administrators, licenses and management data in a database. The database is:

MySQL

Postgres SQL

MarisDB

SOLR

82. Which one of these features is NOT associated with the Check Point URL Filtering and Application Control Blade?

Detects and blocks malware by correlating multiple detection engines before users are affected.

Configure rules to limit the available network bandwidth for specified users or groups.

Use UserCheck to help users understand that certain websites are against the company’s security policy.

Make rules to allow or block applications and Internet sites for individual applications, categories, and risk levels.

83. Connections to the Check Point R81 Web API use what protocol?

HTTPS

RPC

VPN

SIC

84. Check Point recommends configuring Disk Space Management parameters to delete old log entries when available disk space is less than or equal to?

50%

75%

80%

15%

85. What SmartEvent component creates events?

Consolidation Policy

Correlation Unit

SmartEvent Policy

SmartEvent GUI

86. R81.10 management server can manage gateways with which versions installed?

Versions R77 and higher

Versions R76 and higher

Versions R75.20 and higher

Versions R75 and higher

87. You can select the file types that are sent for emulation for all the Threat Prevention profiles. Each profile defines a(n) _____ or _____ action for the file types.

Inspect/Bypass

Inspect/Prevent

Prevent/Bypass

Detect/Bypass

88. The Firewall kernel is replicated multiple times, therefore:

The Firewall kernel only touches the packet if the connection is accelerated

The Firewall can run different policies per core

The Firewall kernel is replicated only with new connections and deletes itself once the connection times out

The Firewall can run the same policy on all cores.

89. Which statement is NOT TRUE about Delta synchronization?

Using UDP Multicast or Broadcast on port 8161

Using UDP Multicast or Broadcast on port 8116

Quicker than Full sync

Transfers changes in the Kernel tables between cluster members.

90. Which of the following statements is TRUE about R81 management plug-ins?

The plug-in is a package installed on the Security Gateway.

Installing a management plug-in requires a Snapshot, just like any upgrade process.

A management plug-in interacts with a Security Management Server to provide new features and support for new products.

Using a plug-in offers full central management only if special licensing is applied to specific features of the plug-in.

Page 10 of 10

91. To fully enable Dynamic Dispatcher with Firewall Priority Queues on a Security Gateway, run the following command in Expert mode then reboot:

fw ctl multik set_mode 1

fw ctl Dynamic_Priority_Queue on

fw ctl Dynamic_Priority_Queue enable

fw ctl multik set_mode 9

92. Which of the following is a new R81 Gateway feature that had not been available in R77.X and older?

Limits the upload and download throughput for streaming media in the company to 1 Gbps.

Time object to a rule to make the rule active only during specified times.

Sub Policies ae sets of rules that can be created and attached to specific rules. If the rule is matched, inspection will continue in the sub policy attached to it rather than in the next rule.

93. You noticed that CPU cores on the Security Gateway are usually 100% utilized and many packets were dropped. You don’t have a budget to perform a hardware upgrade at this time. To optimize drops you decide to use Priority Queues and fully enable Dynamic Dispatcher.

How can you enable them?

fw ctl multik dynamic_dispatching on

fw ctl multik dynamic_dispatching set_mode 9

fw ctl multik set_mode 9

fw ctl multik pq enable

94. What is the least amount of CPU cores required to enable CoreXL?

95. In R81 spoofing is defined as a method of:

Disguising an illegal IP address behind an authorized IP address through Port Address Translation.

Hiding your firewall from unauthorized users.

Detecting people using false or wrong authentication logins

Making packets appear as if they come from an authorized IP address.

96. Where you can see and search records of action done by R81 SmartConsole administrators?

In SmartView Tracker, open active log

In the Logs & Monitor view, select “Open Audit Log View”

In SmartAuditLog View

In Smartlog, all logs

97. Which statement is true regarding redundancy?

System Administrators know when their cluster has failed over and can also see why it failed over by using the cphaprob Cf if command.

ClusterXL offers three different Load Sharing solutions: Unicast, Broadcast, and Multicast.

Machines in a ClusterXL High Availability configuration must be synchronized.

Both ClusterXL and VRRP are fully supported by Gaia and available to all Check Point appliances, open servers, and virtualized environments.

98. What is true about VRRP implementations?

VRRP membership is enabled in cpconfig

VRRP can be used together with ClusterXL, but with degraded performance

You cannot have a standalone deployment

You cannot have different VRIDs in the same physical network

99. In order to get info about assignment (FW, SND) of all CPUs in your SGW, what is the most accurate CLI command?

fw ctl sdstat

fw ctl affinity Cl Ca Cr Cv

fw ctl multik stat

cpinfo

100. fwssd is a child process of which of the following Check Point daemons?

fwd

cpwd

fwm

cpd

Updated 156-315.81 Exam Dumps – Real to Pass Check Point Certified Security Expert R81 Exam

Updated 156-315.81 Exam Dumps – Real to Pass Check Point Certified Security Expert R81 Exam

Read 156-315.81 Free Dumps Demo Questions Here To Check The Updated Dumps

Share this post

Author

Related Posts