Free NSE4_FGT-7.0 Practice Questions - Prepare For Fortinet NSE 4 - FortiOS 7.0 Exam Well

Free NSE4_FGT-7.0 Practice Questions – Prepare For Fortinet NSE 4 – FortiOS 7.0 Exam Well

Eleanor2022-02-28T08:34:35+00:00

By Eleanor Fortinet, NSE 4 Network Security Professional NSE4_FGT-7.0, NSE4_FGT-7.0 dumps, NSE4_FGT-7.0 practice questions 1 Comment

As the requirement of Fortinet NSE 4 Network Security Professional certification, NSE4_FGT-7.0 exam becomes more and more popular because NSE4_FGT-6.4 exam will be retired on March 31, 2022. While preparing for Fortinet NSE 4 – FortiOS 7.0 NSE4_FGT-7.0 exam, you can choose online NSE4_FGT-7.0 practice questions online to make a clear preparation. Thousands of online resources are available, but you need to choose the valid study guide and exam dumps for reading. So we are online to provide you with free NSE4_FGT-7.0 practice questions to help you verify the online dumps first.

At ITPrepare, you can read free NSE4_FGT-7.0 practice questions and test yourself online.

Page 1 of 2

1. Refer to the exhibits.

Exhibit A.

Exhibit B.

The exhibit contains the configuration for an SD-WAN Performance SLA, as well as the output of diagnose sys virtual-wan-link health-check.

Which interface will be selected as an outgoing interface?

port2

port3

port4

port1

2. Refer to the exhibit.

Given the interfaces shown in the exhibit, which two statements are true? (Choose two.)

Traffic between port2 and port2-vlan1 is allowed by default.

port1-vlan10 and port2-vlan10 are part of the same broadcast domain.

port1-vlan1 and port2-vlan1 can be assigned in the same VDOM or to different VDOMs.

port1 is a native VLA

3. A network administrator wants to set up redundant IPsec VPN tunnels on FortiGate by using two IPsec VPN tunnels and static routes.

All traffic must be routed through the primary tunnel when both tunnels are up. The secondary tunnel must be used only if the primary tunnel goes down.

In addition, FortiGate should be able to detect a dead tunnel to speed up tunnel failover

Which two key configuration changes are needed in FortiGate to meet the design requirements? (Choose two.)

Configure a higher distance on the static route for the primary tunnel, and a lower distance on the static route for the secondary tunnel.

Enable Dead Peer Detection.

Enable Auto-negotiate and Auto Keep Alive on the phase 2 configuration of both tunnels.

Configure a lower distance on the static route for the primary tunnel, and a higher distance on the static route for the secondary tunnel.

4. Refer to the exhibits.

Exhibit A.

Exhibit B.

An administrator creates a new address object on the root FortiGate (Local-FortiGate) in the security fabric.

After synchronization, this object is not available on the downstream FortiGate (ISFW).

What must the administrator do to synchronize the address object?

Change the csf setting on Local-FortiGate (root) to set configuration-sync local.

Change the csf setting on ISFW (downstream) to set configuration-sync local.

Change the csf setting on Local-FortiGate (root) to set fabric-object-unification default.

Change the csf setting on ISFW (downstream) to set fabric-object-unification default.

5. 1.Which two statements about FortiGate FSSO agentless polling mode are true? (Choose two.)

FortiGate uses the AD server as the collector agent.

FortiGate uses the SMB protocol to read the event viewer logs from the DCs.

FortiGate does not support workstation check.

FortiGate directs the collector agent to use a remote LDAP server.

6. Which two statements about SSL VPN between two FortiGate devices are true? (Choose two.)

The client FortiGate requires a client certificate signed by the CA on the server FortiGate.

The client FortiGate requires a manually added route to remote subnets.

The client FortiGate uses the SSL VPN tunnel interface type to connect SSL VP

Server FortiGate requires a CA certificate to verify the client FortiGate certificate.

7. Refer to the exhibits.

Exhibit A shows system performance output.

Exhibit B shows s FortiGate configured with the default configuration of high memory usage thresholds.

Based on the system performance output, which two statements are correct? (Choose two.)

FortiGate will start sending all files to FortiSandbox for inspection.

FortiGate has entered conserve mode.

Administrators cannot change the configuration.

Administrators can access FortiGate only through the condole port.

8. An administrator does not want to report the logon events of service accounts to FortiGate.

What setting on the collector agent is required to achieve this?

Add user accounts to the Ignore User List.

Add the support of NTLM authentication.

Add user accounts to the FortiGate group filter.

Add user accounts to Active Directory (AD).

9. Refer to the exhibit.

The Root and To_Internet VDOMs are configured in NAT mode. The DMZ and Local VDOMs are configured in transparent mode.

The Root VDOM is the management VDOM. The To_Internet VDOM allows LAN users to access the internet. The To_Internet VDOM is the only VDOM with internet access and is directly connected to ISP modem.

With this configuration, which statement is true?

Inter-VDOM links are required to allow traffic between the Local and Root VDOMs.

A default static route is not required on the To_Internet VDOM to allow LAN users to access the internet.

Inter-VDOM links are required to allow traffic between the Local and DMZ VDOMs.

Inter-VDOM links are not required between the Root and To_Internet VDOMs because the Root VDOM is used only as a management VDO

10. Which statement correctly describes NetAPI polling mode for the FSSO collector agent?

NetAPI polling can increase bandwidth usage in large networks.

The NetSessionEnum function is used to track user logouts.

The collector agent must search security event logs.

The collector agent uses a Windows API to query DCs for user logins.

Page 2 of 2

11. Refer to the exhibit.

The global settings on a FortiGate device must be changed to align with company security policies.

What does the Administrator account need to access the FortiGate global settings?

Enable two-factor authentication

Change Administrator profile

Change password

Enable restrict access to trusted hosts.

12. Refer to the exhibits.

Exhibit A.

Exhibit B.

The SSL VPN connection fails when a user attempts to connect to it.

What should the user do to successfully connect to SSL VPN?

Change the SSL VPN port on the client.

Change the Server IP address.

Change the idle-timeout.

Change the Server IP address.

13. Refer to the exhibit.

The exhibit displays the output of the CLI command: diagnose sys ha dump-by vcluster.

The override setting is enable for the FortiGate with SN FGVM010000064692.

Which two statements are true? (Choose two.)

FortiGate SN FGVM010000065036 HA uptime has been reset.

FortiGate devices are not in sync because one device is down.

FortiGate SN FGVM010000064692 is the primary because of higher HA uptime.

FortiGate SN FGVM010000064692 has the higher HA priority.

14. FortiGuard categories can be overridden and defined in different categories. To create a web rating override for example.com home page, the override must be configured using a specific syntax.

Which two syntaxes are correct to configure web rating override for the home page? (Choose two.)

www.exaple.com

www.example.com/index.html

example.com

www.example.com:443

15. Refer to the exhibit.

An administrator is running a sniffer command as shown in the exhibit.

Which three pieces of information are included in the sniffer output? (Choose three.)

Interface name

IP header

Application header

Packet payload

Ethernet header

16. An administrator has configured outgoing interface any in a firewall policy.

Which statement is true about the policy list view?

Interface Pair view will be disabled.

Search option will be disabled.

Policy lookup will be disabled.

By Sequence view will be disabled.

17. Which two statements are true about the Security Fabric rating? (Choose two.)

The Security Fabric rating is a free service that comes bundled with all FortiGate devices.

Many of the security issues can be fixed immediately by clicking Apply where available.

The Security Fabric rating must be run on the root FortiGate device in the Security Fabric.

It provides executive summaries of the four largest areas of security focus.

18. Which three options are the remote log storage options you can configure on FortiGate? (Choose three.)

FortiSandbox

FortiCloud

FortiSIEM

FortiCache

ForiAnalyzer

19. An administrator is configuring an IPsec VPN between site A and site B. The Remote Gateway setting in both sites has been configured as Static IP Address. For site A, the local quick mode selector is 192.168.1.0/24 and the remote quick mode selector is 192.168.2.0/24.

Which subnet must the administrator configure for the local quick mode selector for site B?

192.168.3.0/24

192.168.1.0/24

192.168.0.0/8

192.168.2.0/24

20. Refer to the exhibits to view the firewall policy (Exhibit A) and the antivirus profile (Exhibit B).

Exhibit A.

Exhibit B.

Which statement is correct if a user is unable to receive a block replacement message when downloading an infected file for the first time?

The flow-based Inspection is used, which resets the last packet to the user.

The volume of traffic being inspected is too high for this model of FortiGate.

The firewall policy performs the full content inspection on the file.

The intrusion prevention security profile needs to be enabled when using flow-based inspection mode.

Free NSE4_FGT-7.0 Practice Questions – Prepare For Fortinet NSE 4 – FortiOS 7.0 Exam Well