Passing Cisco DCCOR Certification 350-601 Exam Successfully: Using The Most Updated 350-601 Practice Questions

Eleanor2023-01-13T08:49:31+00:00

By Eleanor CCNP Data Center, Cisco 350-601, 350-601 DCCOR, 350-601 exam dumps, 350-601 free demo, 350-601 practice questions 0 Comments

Passing the 350-601 Implementing and Operating Cisco Data Center Core Technologies (DCCOR) certification exam can help you take advantage of the many benefits, including increased job opportunities and higher earning potential. We understand that preparing for the 350-601 exam can be challenging, but with our most updated 350-601 practice questions, you can be sure that you are getting the best possible preparation. So, don’t wait any longer, download our practice questions today, and start your journey toward becoming an Implementing and Operating Cisco Data Center Core Technologies (DCCOR) certified professional.

Take Cisco 350-601 free dumps demo below first:

Page 1 of 8

1. Which method must a network engineer use to upgrade the BIOS firmware of a Cisco UCS standalone C-Series reck-mount server?

Use the Cisco host upgrade utility.

Use the Cisco hardware upgrade utility.

Use the Cisco host firmware policy.

Use the U-ACPI Interface.

2. DRAG DROP

An engineer is implementing security on the Cisco MDS 9000 switch.

Drag drop the descriptions from the left onto the correct security features on the right.

3. A bridge domain is being extended out of a Cisco ACI fabric.

Between which of these components are policies used to identify the connectivity between Endpoint Groups and the external connection?

an external bridge domain and an external routed domain

internal contracts and external contracts

internal EPGs and external EPGs

L2Out and L3Out

4. An engineer must configure HTTPS secure management for Cisco UCS Manager using a key ring named kr2016 and a key size of 1024 bits. The environment consists of a primary fabric interconnect named UCS-A and a secondary fabric interconnect named UCS-B.

Which command sequence must be used to accomplish this goal?

Option A

Option B

Option C

Option D

5. An engineer must apply AAA configuration on a Cisco MDS 9000 Series Switch.

The solution must meet these conditions:

✑ It must use a challenge-response authentication protocol that uses MD5 hashing with an incrementally changing identifier

✑ The RADIUS configuration must t>e automatically shared with other MDS switches in the environment.

The RADIUS server is already defined.

Which command set completes the configuration?

Option A

Option B

Option C

Option D

6. Which two statements about the process of upgrading an EPLD on a Cisco MDS 9000 series Switch are correct? (Choose two.)

The EPLDs for all the modules on a switch must be upgraded at the same time.

EPLD upgrades can be completed without powering down the module during the upgrade.

EPLDs can be upgraded only to the latest EPLD image.

EPLDs can be upgraded without replacing the hardware.

An upgrade verification identifies the impact of each EPLD upgrade.

7. Which data structure results from running this Python code?

Set

Tuple

Dictionary

List

8. DRAG DROP

Drag and drop the characteristics from the left onto the NAS protocols on the right. Some characteristics are used more than once

9. Refer to the exhibit.

Which two statements about the routing table of the leaf switch are true? (Choose two.)

The next hop 10.0.1.14 for route 172.16.99.0/24 is the TEP address of a border leaf in AC

172.16.100.0/24 is a BD subnet in AC

The next hop 10.0.8.65 for route 10.20.1.0./24 is the TEP address of a border leaf in AC

The next hop 10.1.168.95 for route 172.16.100.0/24 is the TEP address of a border leaf in AC

10.20.1.0./24 is a BD subnet in AC

10. A network engineer must prevent data comuption due to cross fabric communication in an FCoE environment.

Which configuration must be applied to the Cisco Nexus Unified Switches to achieve this objective?

Switch(config)#fcoe fcmap 0e,fc,2a

Switch(config-if)# no fcoe fcf-priority 0

Switch(config-if) # shutdown lan

Switch(config) # no fcoe fcf-priority

Page 2 of 8

11. A company provides applications and database hosting services to multiple customers using isolated infrastructure-as-a-service services within the same data center environment. The environment is based on Cisco MDS 9000 Series Switches. The requirement is to manage the environment by using Fibre Channel Security Protocol and to enable user authentication when the centralized AAA server is unreachable All communication between the MDS switches and the remote servers must be encrypted.

Which command set must be used to meet these requirements?

Option A

Option B

Option C

Option D

12. DRAG DROP

Drag and drop the characteristics from the left onto the correct storage systems on the right.

13. What is a characteristic of EPLD updates on Cisco MDS 9000 Series Switches?

EPLD updates are installed only via the Cisco DCNM GUI

EPLD packages update hardware functionality on a device

EPLD bundles are released separately from a Cisco MDS NX-OS release

EPLD updates are nondisruptive to traffic flow

14. An engineer must configure the order in which the server attempts to boot from available boot device types using Cisco Integrated Management Controller (Cisco IMC). The engineer must change the boot order configuration during the setup and apply the new requirements multiple times. The requirement is to change the Cisco IMC actual boot order so it is different from the configured boot order.

Which setting accomplishes this goal?

Enable the system to boot with the configured boot order.

Set the boot configuration directly through BIO

Configure the legacy and precision boot order to be mutually exclusive.

Apply UEFI Secure Boot for a nonsupported operating system.

15. Refer to the exhibit.

Which two statements describe the routing table of the leaf switch? (Choose two.)

The next hop 10.0.8.65 for route 10.20.1.0724 is the TEP address of a border leaf in AC

The next hop 10.0.1.14 for route 172.16.99.0/24 is the TEP address of a border leaf in AC

The next hop 10.1.168.95 for route 172.16.100 0/24 is the TEP address of a border leaf in AC

172.16.100.0/24 is a BD subnet in AC

10.20.1.0/24 is a BD subnet in AC

16. DRAG DROP

Refer to the exhibit.

The server is sending traffic to the storage server using Fiber Channel protocol. The requirement is for the N5K-1 to forward traffic to MDS9k-1.

Drag and drop the configuration steps from the right to complete the configuration for N5K-1 on the left. Not all configuration steps are used.

17. Refer to the exhibit.

Which type of backup is required to restore a Cisco UCS configuration?

system configuration

all configuration

logical configuration

full state

18. DRAG DROP

Refer to the exhibit.

The Cisco Nexus Series Switches SW1, SW2, and SW3 are connected via Layer 2 copper interfaces. An engineer implements loop prevention standard IEEE 802.1w on each VLAN lo provide lasier recovery from network changes or failures.

The Implementation has these requirements

✑ Interfaces that are connected to Layer 2 hosts must not receive STP BPDUs.

✑ The implementation must detect unidirectional links due to one-way traffic twisted-pair links

✑ Bridge assurance must be enabled between SW2 and SW3

✑ The Layer 2 domain must be protected from superior BPDUs that arrive from external switches.

Drag and drop the code snippets from the right onto the blanks in the code on the left to complete the configuration for SW3. Not all code snippets are used.

19. A network engineer needs to configure system logging on the MDS switch. The messages must be displayed with the severity level of "warning” and above. For security reasons the users must be logged out of the console after 5 minutes of inactivity.

Which configuration must be applied to meet these requirements?

Option A

Option B

Option C

Option D

20. An engineer must configure Cisco Nexus 9000 Series Switches for Cisco UCS Director integration. The configuration must enable automated onboarding of the switches as they come online. For security purposes, the switches must have the bare minimum of connection methods enabled. The connection protocol must allow authentication through credentials.

Which protocol must be configured on the switches to allow automated onboarding?

SNMP

Telnet

SSH

HTTPS

Page 3 of 8

21. Refer to the exhibit.

Which statement about the ERSPAN configuration in this environment is true.

Host A is the source of ERSPAN spanned traffic and host B is the traffic analyzer.

Host B is the source of ERSPAN spanned traffic and host A is the traffic analyzer.

The session number of the source of ERSPAN spanned traffic must have a session ID of 48 for the traffic analyzer to receive the traffic.

The session number of the source of ERSPAN spanned traffic must have a session ID of 47 for the traffic analyzer to receive the traffic.

22. Refer to the exhibit. A network engineer must configure an authentication solution for Cisco UCS with these conditions:

• Two-factor authentication must be enabled for all UCS user authentication.

• All AAA packets must be encrypted and use TCP port 49 to establish communication.

Which set of actions needs these requirements?

Create the LDAP provider. Change the LDAP group rule in an LDAP provider.

Create the RADIUS group mapping. Change the RADIUS group rule in a RADIUS provider.

Remove the LDAP provider. Create a TACACS+ provider in user management.

Delete the LDAP group mapping. Create a RADIUS provider in user management.

23. Commit the role to the switch to the active user database

24. DRAG DROP

Refer to the exhibit

An engineer must provision a VXLAN deployment. The OSPF has already been configured as the underlay protocol All BGP configurations will be performed using the template method.

The deployment must meet these requirements

✑ The local update source for leaf switches must be loopback 1

✑ The router ID must be the local loopback IP address

✑ The external BGP connections must use a template name

Drag and drop the configuration snippets from the bottom to complete the configuration

25. Refer to the exhibit.

A developer must create a Bash script that performs a Chef Client reload in the event of a system reset.

Which command completes the script?

Option A

Option B

Option C

Option D

26. An engineer must integrate Cisco ACI with a VMware vSphere environment. The requirement is to use a VMware Distributed Virtual Switch and to assign the encapsulation VLAN of the EPG from the VLAN pool.

Which configuration set accomplishes this goa?

Create a VMM domain association under the EPGs Create a VLAN pool with static alocated VLANs.

Create a physical domain association under the EPGs Create a VLAN pool with static alocated VLANs.

Create a physical domain association under the EPGs. Create a VLAN pool with oVnarmc alocated VLANs

Create a VMM domain association under the EPGs Create a VLAN pool with dynamic alocated VLANs.

27. Refer to the exhibit.

Which backup operation type not include the preserve identities feature?

Full state

Logical configuration

System configuration

All configuration

28. DRAG DROP

An engineer must recover configuration on a Cisco MDS 9000 Series switch from a previous version that was backed up to bootflash and then verify the restoration.

Drag and drop the commands on the left to the correct order on the right.

29. Which two actions must be taken to directly connect a Fibre Channel storage array to a Cisco UCS domain? (Choose two.)

Configure a new VSAN

Create a new vHBA dedicated to the storage array

Configure a Fibre Channel port channel

Create a Storage Connection Policy

Configure the Fibre Channel poet as a Fibre Channel storage port

30. Refer to the exhibit.

What happens to the broadcast traffic when it reaches aggregation switches?

Only Agg-1 switch receives broadcast packets and does not forward to the peer link on Agg-2 switch.

Agg-1 switch prevents broadcast packets received on the vPC peer link from exiting the switch on ports Eth2M and Eth2/5

Agg-2 switch receives broadcast packets and stops forwarding to the peer link on Agg-1 switch.

Agg1 and Agg2 switches receive broadcast packets and does not forward them to me peer link or the port channel

Page 4 of 8

31. Refer to the exhibit.

A network engineer is implementing a configuration checkpoint on a Cisco Nexus 9000 Series Switch. The configuration must skip any existing vPC configuration errors and must complete if there are any configuration errors. The engineer finished the vPC domain configuration part.

Which command completes the checkpoint implementation?

stop-at-first-failure

atomic

best-effort

verbose

32. Refer to the exhibit.

Which VLANs are capable to be assigned on vPC interfaces?

100-103

100-104

100-102

100-105

33. Which storage protocol reduces file locks by using leasing?

CIFS

NFS 4

NFS 3

SMB

34. A Cisco UCS C-Series server is installed at a data center. The server should be managed by the Cisco UCS Manager by using a single cable for management and data traffic.

Which configuration should be applied after the Physical connection is established?

UCS-A# scope server 1 UCS-A /server# scope cimc UCS-A /server/cimc # scope mgmt-conn sideband UCS-A /server/cimc # mgmt-conn-state enabled UCS-A /server/cimc/mgmt-conn* # commit-buffer

UCS-A# scope chassis 1 UCS-A /chassis# scope cimc UCS-A /chassis/cimc # scope mgmt-conn sideband UCS-A /chassis/cimc/mgmt-conn # mgmt-conn-state enabled UCS-A /chassis/cimc/mgmt-conn* # commit-buffer

UCS-A# scope chassis 1 UCS-A /chassis# scope cimc UCS-A /chassis /cimc # set mgmt-conn-state enabled UCS-A /chassis /cimc/mgmt-conn* # commit-buffer

UCS-A# scope server 1 UCS-A /server# scope cimc UCS-A /server/cimc # scope mgmt-conn sideband UCS-A /server/cimc/mgmt-conn #set mgmt-conn-state enabled UCS-A /server/cimc/mgmt-conn* # commit-buffer

35. Due to a domain name change at a customer site, a Cisco UCS cluster must be renamed. An engineer must recommend a solution to ensure that the Cisco UCS Manager is available over HTTPS.

Which action accomplishes this goal?

Reinstall the cluster to generate the default key ring certificate

Generate a new default key ring certificate from the Cisco UCS Manager

Reboot the SSO component of the Cisco UCS Manager

Regenerate the default key ring certificate manually

36. Refer to the exhibit.

Software downgrade is required on a Cisco Nexus 7000 Series Switch.

What is displayed when this command is executed?

features and commands that are removed automatically from the configuration

features that are enabled automatically after the downgrade

compatibility of software in the system bootflash file

impact of a software upgrade in ISSU and chassis reload

37. An engineer must configuration a backup and restore of Cisco UCS Manager during the weekend maintenance windows. The configuration must be restored to its original state on Monday morning. The end users can make changes only to the Service Profile configuration.

Which set of actions meets these requirements?

Schedule a system backup to run at the start of every weekend and manually import the backup on Monday morning.

Schedule a system backup to run at the start of every weekend and schedule the import of the backup to run on Monday morning

Schedule a logical backup to run at the start of every weekend and manually import the backup on Monday morning.

Schedule a logical backup to run at the start of every weekend and schedule the import of the backup to run on Monday morning.

38. An engineer is duplicating an existing Cisco UCS setup at a new site.

What are two characteristics of a logical configuration backup of a Cisco UCS Manager database? (Choose two.)

contains the AAA and RBAC configurations

contains a file with an extension.tgz that stores all of the configurations

contains the configuration organizations and locales

contains all of the configurations

contains the VLAN and VSAN configurations

39. DRAG DROP

Drag and drop the firmware packages from the left onto the software bundles they belong to on the right.

40. A customer requires a solution to orchestrate the configuration of storage arrays, firewalls, and Cisco ACI networking. Additionally, the orchestration product must support open automation and a service catalog.

Which solution meets these requirements?

Cisco UCS Director

Cisco Intersight

Cisco Data Center Network Manager

Cisco Workload Optimization Manager

Page 5 of 8

41. Which statement about the MAC address that the FCoE Initialization Protocol chooses for use by an E-Node in an FCoE implementation is true?

The FCoE Initialization Protocol uses the burned-in MAC address of the converged network adapter for all FCoE operations.

The FCoE Initialization protocol uses a 24-bit FC-MAP and concatenates a 24-bit Fibre Channel ID to create a fibric-provided MAC address.

The FCoE Initialization Protocol uses 01.00.0C as the first 24 bits of the MAC address and appends a 24-bit Fibre Channel ID to derive a full 48-bit FCoE MAC address.

FCoE does not use a MAC address. The FCoE Initialization Protocol is used to acquire a Fibre Channel ID, and the address is used for all FCoE communications in the same way as Fibre Channel Protocol.

42. What is a recommended design choice in a topology for multipathing iSCSI traffic?

single initiator to dual targets

initiators and targets in separate subnets

dual initiators to a single target with bonded interfaces

two NICs bended together on the initiator

43. An engineer must perform a nondisruptive software upgrade on a dual supervisor Cisco Nexus 7000 series switch.

What is the cause of the upgrade being disruptive?

The show install all impact command is not issued before the upgrade

The kickstart image is installed by using the Install all kickstart image system image command

Attempt to simultaneously upgrade more than three cards

Change to the configuration settings or the network connections during the upgrade process

44. An engineer configures a storage environment for a customer with high- security standards. The secure environment is configured in vsan 50. The customer wants to maintain a configuration and active databases and prevent unauthorized switches from joining the fabric. Additionally, the switches must prevent rogue devices from connecting to their ports by automatically learning the WWPNs of the ports connected to them for the first time.

Which two configuration sets must be used to meet these requirements? (Chose two.)

Option A

Option B

Option C

Option D

Option E

45. Which two configuration settings are available in the in the cisco UCS flmware Auto sync server policy?

User Notification

User Acknowledge

No Action

Delayed Action

Immediate Action

46. A network administrator must create a Linux container on a Cisco Nexus Series Switch. The container requires 10 percent of the CPU of the switch and 1024 MB of RAM to run successfully.

Which task provides the necessary resources?

Edit the container properties with the guestshell run command.

Increase the compute resources with the guestshell resize command.

Enable the Bash shell of the switch with the feature bash command

Modify resource allocation with the virtual-service resize command.

47. Which statement is true about upgrading the firmware on a Cisco MDS storage switch with dual supervisors?

The standby supervisor must be offline before the firmware upgrade begins.

Both supervisors load the new firmware and then the active supervisor reboots.

Supervisors can be upgraded independently to test the new firmware.

The new firmware is load on the standby supervisor first.

48. An engineer is deploying a VXLAN EVPN environment for a customer. The customers environment suffers from a large amount of flooding related to hosts attempting to resolve the MAC to IP mapping on the network segment.

Which feature prevents this issue from happening in the future?

anycast rendezvous point

anycast gateway

IP ARP SYNC

IP ARP suppression

49. An engineer must configure a Cisco UCS domain for monitoring and management by the Cisco Intersight SaaS platform. After the setup is complete, administrators must have full control to configure the device through Cisco UCS Manager and Intersight.

Which set of actions accomplishes this task?

Configure Devce Connector Access Mode as Allow Control in Device Console Claim the device on Intersight as UCSM Managed Mode.

Configure Device Connector Access Mode as Allow Control in Cisco UCS Manager Claim the device on intersightc as Intersight Managed Mode

Configure Device Connector Access Moao as Allow Control in Device Console. Claim the device on intersight as Intersight Managed Mode

Configure Device Connector Access Mode as Allow Control in Cisco UCS Manager Claim the device on intersight as UCSM Managed Mode

50. An engineer creates a service profile in Cisco UCS Manager and must assign a policy that reboots blades when changes are applied. The changes must be applied only after user acknowledgment.

Which two policies must be configured to meet these requirements? (Choose two.)

Boot Policy

Global Policy

Power Control Policy

Maintenance Policy

Reboot Policy

Page 6 of 8

51. Refer to the exhibit.

What be connected to clear the HA NOT READY status?

server chassis

network uplinks

management ports

Layer 1-Layer 2 ports

52. Which component is excluded by default from the host firmware package?

network interface controller

board controller

storage controller

local disk

53. An engineer must configure OSPF in the data center. The external routes have already been redistributed OSPF.

The network must meet these criteria:

* The data centre servers must reach services in the cloud and the services behind the redistributed routes.

* The exit point toward the internet should be propagated only when there is a dynamically learned default route from the upstream router.

Which feature is required?

Default-information originate

Stubby area

Totally stubby area

Default-information originate always

54. DRAG DROP

A storage engineer must configure zoning on a Cisco MDS 9000 Series switch.

Drag and drop actions from the left into the order on right

55. Several production and development database servers exist in the same EPG and IP subnet. The IT security policy is to prevent connections between production and development.

Which attribute must be used to assign the servers to different microsegments?

Data center

VMM domain

VM name

IP address

56. A network engineer must determine the cooling requirements for a Cisco UCS C-Series Rack Server. The server with PCIe cards is configured with a fan configuration policy.

Which configuration should be used for the fan policy of the server?

Option A

Option B

Option C

Option D

57. An engineer is configuring HTTPS access to Cisco UCS Manager. The engineer created a keyring and created the certificate request for the keyring Cisco UCS Manager continues to receive untrusted messages from a Firefox browser and a Chrome browser.

Which action must be taken as the next step in the HTTPS access configuration?

Create a trusted point

Sign the certificate using the Cisco UCS Manager.

Obtain a validated certificate from Cisco

Install a trusted certificate in the browser store

58. An engineer deploys a new Cisco Nexus 5000 Series Switch in an existing environment with strict security policies.

The new device should meet these requirements:

✑ Secure end-user ports with minimum configuration effort.

✑ Log security breaches and require manual recovery.

✑ Retain the switch configuration if the device restarts.

Which configuration must be used?

A)

Option A

Option B

Option C

Option D

59. Refer to the exhibit.

An engineer must set access to Cisco IMC. The access must be allowed by logging onto the https //datacenter local web page. The configuration presented is on the Cisco UCS C240 Series Server.

Which set of commands completes the configuration?

A)

Option A

Option B

Option C

Option D

60. DRAG DROP

An engineer must shut down the Ethernet 1/2 interface when the Ethernet 4/5 interface state is down.

Drag and drop the CLI commands from the bottom onto the blanks in the exhibit to implement this EEM. Not all commands are used.

Page 7 of 8

61. A customer data center is configured for distribution of user roles, call home, and NTP. The data center was split into two geographically separate locations called DC1 and DC2. The requirement is for the user role configurations to be distributed in DC1 and for NTP and call home features to be constrained to DC2.

Which two configuration sets must be used to meet these requirements? (Choose two.)

Option A

Option B

Option C

Option D

Option E

62. A network engineer must deploy a configuration backup policy to the Cisco UCS Manager. The file generated from this backup must have a snapshot of the entire system that should be used to restore the system during disaster recovery. The backup file must be transferred insecurely by using the TCP protocol.

Which configuration backup settings meet these requirements?

Type: All Configuration Protocol: SCP

Type: Logical Configuration Protocol: SFTP

Type: Full State Protocol: FTP

Type: System Configuration Protocol: TFTP

63. Refer to the exhibit.

A network engineer configures the VXLAN between the routers in a data center. The VLAN 10 must be extended between routers A and B. The initial VXLAN configuration is completed on Router A.

Which configuration finishes the VXLAN configuration on Router A?

A)

Option A

Option B

Option C

Option D

64. Refer to the exhibit.

An engineer is implementing zoning on two Cisco MDS switches. After the implementation is finished, E Ports that connect the two Cisco MDS switches becomes isolated.

What is wrong with the implementation?

E Ports on both MDS switches must be configured as F ports for the zoning to function.

Zones are local to the MDS switch and name service must be used to activate the connection between E ports.

Different zone set names must be configured on both MDS switches.

Zones must have the same name on both MDS switches for the E ports to function.

65. 1.An engineer must configure a VXLAN routing on a cisco Nexus 9000 series Switch. The engineer requires a solution where all the leaf switches have the same gateway MAC and IP address.

Which configuration set accomplishes this task?

A)

Option A

Option B

Option C

Option D

66. Refer to the exhibit.

Which setting must be configured to prevent reuse of passwords?

No Change Interval

Change Interval

History Count

Change Count

67. APIC EPG Resolution Immediacy is set to “Immediate”.

Which statement is true about the Deployment Immediacy for VMM domains associated to EPGs?

The “Immediate” and “On demand” options require a port group to be created on the VD

If “On demand” is selected, the policy is programmed in the hardware only when the APIC detects a VM created in the EP

If “On demand” is selected the policy is programmed in the hardware only when the first packet is received through the data path.

If “immediate” is selected the policy is programmed in the hardware as soon as the leaf is booted.

68. Refer to the exhibit.

What is the result of this series of commands?

It reboots the server immediately.

It verifies the firmware update on the server.

It activates the firmware on the next adapter boot.

It updates the firmware on adapter 1/1/1 immediately.

69. Which MAC address is an HSRP version 2?

0100.5E7

FFFF

3799.9943 3000

0000.0C9

F0C8

0000.OC07.AC1H

70. An engineer requires the Cisco Fabric Services to distribute NTP configuration only to the members within the scope of a VSAN that belongs to a Cisco Unified Network.

Which scope distribution must be selected to meet this requirement?

Logical scope

Physical scope

Uncoordinated scope

Coordinated scope

Page 8 of 8

71. Refer to the exhibit.

What is a characteristic presented in the service profile of the UUID?

based on the hardware

vendor assigned

unique system generated

allocated from a UUID pool

72. An engineer performs a set of configuration changes for the vPC domain using Session Manager.

Which two commands are used to verify the configuration and apply the device changes when no errors are returned? (Choose two)

write

verify

commit

checkpoint

apply

73. Refer to the exhibit.

Server1 is connected to a Cisco Nexus 9000 Series Switch via a 1-Gb port channel. The storm control is applied to the Eth0 device with a zero percent value.

What does the switch do to traffic that traverses the switch interfaces during the streaming window that exceeds the bandwidth of the interfaces?

forwards all traffic

forwards half of the traffic

suppresses all traffic

drops all of the excess traffic

74. Refer to the exhibit.

An engineer must monitor ingress traffic from SW1 and SW2 port-channel interfaces from SW3.

Which configuration must be implemented to accomplish this goal?

A)

Option A

Option B

Option C

Option D

75. Which two statements describe modifying Cisco UCS user accounts? (Choose two.)

Disabling a user account maintains all of the data in the Cisco UCS Fabric Interconnect.

The admin account is used only to log on by using SS

The password of the user account must contain a minimum of 10 characters.

Local user accounts override the same account on a remote authentication server, such as TACACS, RADIUS, or LDA

The password of the user account expires in 30 days.

76. A network engineer needs a tool to automate the provisioning of Cisco UCS Service Profiles. The administrator has limited programming knowledge but is skilled with scripting tools. The tool must include existing support for Cisco UCS configuration. Additionally, the administrator will eventually use the solution to manage Cisco UCS C-Series Rack Servers.

Which tool meets these requirements?

Cisco DCNM

Python scripts

PowerShell

Bash scripts

77. Refer to the exhibit.

An engineer must configure a Fibre Channel device alias named TEST for a device attached to port fc1/9 of a Cisco Nexus Series Switch.

Which command set completes the configuration?

A)

Option

78. What happens to the default host firmware policy after a Cisco UCS Manager upgrade?

It is updated to contain the firmware entries of all the components

It is replaced by a new default policy without any firmware entries.

It is assigned to all the service profiles that include a host firmware policy.

It is set to match the host firmware policy.

79. Refer to the exhibit.

An engineer configures FCIP on a Cisco MDS 9000 Series switch.

What is the result of implementing the configuration?

The switch attempts to make two TCP connections

Compression is performed by using hardware

Mode2 is enabled by default.

Compression is performed by using software.

80. A DNS server with IP address 192.168.1.1 is deployed in a data center A network engineer must configure a Cisco UCS Fabric Interconnect to use this DNS.

Which configuration should be applied?

Option A

Option B

Option C

Option D

Passing Cisco DCCOR Certification 350-601 Exam Successfully: Using The Most Updated 350-601 Practice Questions